Maryland / Prince George's County

Fence Permit in Prince George's County, Maryland

It depends

Sometimes, depending on the project

Before installing or replacing a fence taller than four feet, and before installing a fence of any height on a corner lot, on a historic or protected property, or within the 100-year floodplain.

Confirmed on official page Verified Prince George's County Department of Permitting, Inspections and Enforcement (DPIE)

By Mario Bailey, verified against official sources

Quick answer

Residential building permits in Prince George's County come from the Department of Permitting, Inspections and Enforcement (DPIE), and unusually for a county department its reach is not limited to unincorporated land: DPIE's own published responsibilities chart states that by County Code the county conducts plan review, issues permits and inspects all construction undertaken within the limits of a municipality in the county, with listed exceptions, so the county's 27 incorporated municipalities are largely in scope rather than excluded. Laurel is the one municipality that the chart marks as handling its own Residential Permit, Miscellaneous Residential, Commercial Permits and Fire Review; Bowie, College Park, Greenbelt, District Heights, Cheverly, Mount Rainier, New Carrollton, Riverdale Park, University Park and most of the rest are marked "Municipality & County" for residential permits, meaning a county permit plus a municipal step, while Hyattsville and Upper Marlboro are marked County. For fences specifically, DPIE requires a building permit when the fence is taller than four feet, and at any height on a corner lot, in a historic or protected area, or in the floodplain. Support posts and rails must face the inside of the lot per CB-4-2016, and the owner must sign the Residential Fence/Gate Owner Certification Form.

Typical threshold: fence height above grade, with a permit required at any height on a corner lot, in a historic or protected area, or in the 100-year floodplain.

Who is pulling this permit?

Hire it out

Before you sign, ask the contractor:

  • Who pulls the permit, you or me, and is the permit fee included in the bid?
  • Which inspections will this job need, and who meets the inspector on site?
  • Is your contractor license active in this locality, and under which business name?

When a permit is usually needed

Before installing or replacing a fence taller than four feet, and before installing a fence of any height on a corner lot, on a historic or protected property, or within the 100-year floodplain.

What a fence permit costs in Prince George's County

Line item
fence permitBy formulaDPIE Fee Schedule, effective March 2, 2025, line item "Fence - Residential", minimum permit fee $145: "Total Fee = Administrative Fee $66 + Building Permit Fee $145 + $53 Grading Fee + $5 M-NCPPC. Plus Technology Fee 10%." The schedule states it is the table referenced in Prince George's County Code Subtitle 2, Division 14C, Section 2-253.63.
Fee schedule in forceOfficial scheduleRead . Fees are the jurisdiction’s; we do not mark them up or estimate them.

How Prince George's County compares in Maryland

JurisdictionPermit needed?Threshold
Baltimore CountyIt dependsfence height measured vertical to ground, including a fence set on top of a wall
Howard CountyIt dependsfences 7 ft or under, not enclosing a pool, are exempt from a building permit; over 7 ft or enclosing a pool requires a Miscellaneous Structures building permit
Montgomery CountyPermit requiredNot specified
Prince George's Countythis pageIt dependsfence height above grade, with a permit required at any height on a corner lot, in a historic or protected area, or in the 100-year floodplain

Closest fence permit thresholds outside Maryland

Jurisdictions we cover whose limit sits nearest Prince George's County's 4 feet in height.

How to apply in Prince George's County

Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.

What most fence permit applications include:

  • A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
  • That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
  • Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
  • The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
  • A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).

General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. Prince George's County Department of Permitting, Inspections and Enforcement (DPIE) sets the exact checklist for Prince George's County.

Where to apply in Prince George's County:

Prince George's County Department of Permitting, Inspections and Enforcement (DPIE)

Inspections and closing out your permit

Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.

  1. Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
  2. Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
  3. That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
  4. A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
  5. That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
  6. Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).

Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Prince George's County permit portal or by phone at 301-636-2000.

Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.

Frequently asked questions

Do you need a fence permit in Prince George's County?
Residential building permits in Prince George's County come from the Department of Permitting, Inspections and Enforcement (DPIE), and unusually for a county department its reach is not limited to unincorporated land: DPIE's own published responsibilities chart states that by County Code the county conducts plan review, issues permits and inspects all construction undertaken within the limits of a municipality in the county, with listed exceptions, so the county's 27 incorporated municipalities are largely in scope rather than excluded. Laurel is the one municipality that the chart marks as handling its own Residential Permit, Miscellaneous Residential, Commercial Permits and Fire Review; Bowie, College Park, Greenbelt, District Heights, Cheverly, Mount Rainier, New Carrollton, Riverdale Park, University Park and most of the rest are marked "Municipality & County" for residential permits, meaning a county permit plus a municipal step, while Hyattsville and Upper Marlboro are marked County. For fences specifically, DPIE requires a building permit when the fence is taller than four feet, and at any height on a corner lot, in a historic or protected area, or in the floodplain. Support posts and rails must face the inside of the lot per CB-4-2016, and the owner must sign the Residential Fence/Gate Owner Certification Form. Fence height above grade, with a permit required at any height on a corner lot, in a historic or protected area, or in the 100-year floodplain. Always confirm with the office before starting.
How much does a fence permit cost in Prince George's County?
DPIE Fee Schedule, effective March 2, 2025, line item "Fence - Residential", minimum permit fee $145: "Total Fee = Administrative Fee $66 + Building Permit Fee $145 + $53 Grading Fee + $5 M-NCPPC. Plus Technology Fee 10%." The schedule states it is the table referenced in Prince George's County Code Subtitle 2, Division 14C, Section 2-253.63. See the official fee schedule for current amounts.
How long does a fence permit take in Prince George's County?
In Prince George's County, a fence permit typically takes same day is possible through the Virtual Permit Center walk-through if plans are complete and fees are paid; DPIE may convert a VPC case to a standard case if it exceeds five business days from initial application.. Times can vary by workload and project scope, so confirm with the office.
Where do you apply for a fence permit in Prince George's County?
You can apply through the Prince George's County permit portal or contact the Prince George's County Department of Permitting, Inspections and Enforcement (DPIE) directly. The links are listed on this page.
Can a homeowner pull a fence permit themselves in Prince George's County?
Under Maryland law (Md. Code, Bus. Occ. and Prof. 12-301(b), 6-607(1); Public Safety 12-505): It depends on the trade and the county. Plumbing: state law exempts an individual who personally provides plumbing services in their own residence, but homeowners may not make final connections between the residence and public or private water supply or disposal systems, and Baltimore County plus the WSSC-area counties are largely carved out of the state plumbing title. Electrical: the Maryland Electricians Act prohibits providing electrical services for compensation without a license; it has no express homeowner exemption, so uncompensated work on one's own home falls outside the licensing prohibition, but each county decides whether it will issue an electrical permit to an unlicensed homeowner. Building permits are issued by local jurisdictions, which set their own owner-applicant rules. Confirm how Prince George's County applies this before you apply.

From the Library

What else needs a permit in Prince George's County

Every other permit type we have verified for this jurisdiction, with the rule that applies here.

ProjectPermit needed?ThresholdTypical fee
Deck PermitPermit requiredNot specifiedDPIE Fee Schedule, effective March 2, 2025, line item "Deck or Pergola", minimum permit...
Electrical PermitPermit requiredNot specifiedDPIE Fee Schedule, effective March 2, 2025, prices electrical work by item: "Electrical...
HVAC PermitIt dependsNot specifiedDPIE Fee Schedule, effective March 2, 2025, line item "Mechanical Permit -...
Patio PermitIt dependsarea of an at-grade patio, with a permit required at any size if stairs or ramps are built due to elevation changeDPIE Fee Schedule, effective March 2, 2025, line item "Patio - Residential > 500 Sq Ft"...
Plumbing PermitIt dependsNot specifiedThe DPIE Fee Schedule effective March 2, 2025 carries no residential plumbing permit...
Pool PermitIt dependsprefabricated pools accessory to one- and two-family dwellings that are installed entirely above ground, hold no more than 5,000 gallons, and have a four-foot fence around the pool perimeterDPIE Fee Schedule, effective March 2, 2025: "Swimming Pool (In-ground) - Residential"...
Roof Replacement PermitIt dependsNot specifiedDPIE Fee Schedule, effective March 2, 2025, routes the line item "Roofing - Shingles &...
Shed PermitIt dependsfloor space of a one-story detached accessory structure, and only one such exempt structure is allowed per propertyDPIE Fee Schedule, effective March 2, 2025, line item "Shed > 150 Sq Ft", $1.17 per SF:...
Solar PermitPermit requiredNot specifiedDPIE Fee Schedule, effective March 2, 2025: "Solar Panels (Roof-mounted) - Residential"...

Fence Permit in other Maryland localities

Everything above, sourced

Code references

National and state model-code sections the general guidance on this page is drawn from. They are not Prince George's County documents; the office above sets the local rules.

Verified by a person against the sources above on , not confirmed with Prince George's County Department of Permitting, Inspections and Enforcement (DPIE). Rules change; confirm before you build. How we verify.

Last checked: Report an error on this page

Compare Fence Permit requirements across Maryland localities

It depends
Get quotes