PermitNotebook / Guides

Guide

How Much Is a Roof Permit? One Re-Roof Priced in 26 Offices

One 30-square asphalt tear-off, priced under 26 building departments' current schedules: from $31.05 in San Antonio to $956.13 in unincorporated Broward County, median $250. Flat fees, valuation fees and area fees, the places where the same job needs no permit, what the job itself costs, and the Florida storm-repair rules that change the bill.

A roof permit usually costs a few hundred dollars, and in some places the same job needs no permit at all. For one ordinary job, a tear-off and re-roof of 30 squares of asphalt shingles on a house, the 26 building departments below that permit it would charge anything from $31.05 to $956.13, and the middle of the range is $250. Where the fee is a flat number the size of the job does not matter; where it is a percentage of the job’s value, a more expensive roof costs more to permit.

Median of 26 offices
$250One 30-square asphalt tear-off valued at $31,871, before state surcharges
Lowest
$31.05San Antonio, a flat fee plus two 4% surcharges
Highest
$956.13Unincorporated Broward County, 3.0% of job value
No permit for this job
Fort Worth, Baltimore County, two Virginia counties and othersWhen no sheathing or structure is replaced; each office's exceptions differ
The job itself
$31,871 national averageRemodeling 2025 Cost vs. Value Report (www.costvsvalue.com)
Permit as a share of the job
About 0.1% to 3%

The next step: open your own permit office’s fee schedule and search it for “reroof,” “re-roof” or “roofing.” If there is no roofing line, the re-roof is priced as an alteration or repair from the job’s value, and the office will want your contract price. Whether your re-roof needs a permit at all is a separate question, answered in our guide to what triggers a roof permit.

One roof, 26 price tags

To compare offices on one job, we priced the same re-roof everywhere: remove the old roofing to the bare sheathing and install 30 squares (3,000 square feet) of asphalt shingles, the project the Remodeling 2025 Cost vs. Value Report (www.costvsvalue.com) prices at a national average of $31,871. Where a fee depends on the job’s value we used $31,871; where it depends on area we used 30 squares. Every fee comes from the office’s own schedule as quoted on our page for that office. These 26 are offices whose roof fee we re-read against the schedule on November 11, 16 or 17, 2026, where this job needs a permit and the fee can be worked out from the schedule. They are not every such office; Sacramento ($175 plus a 10% technology surcharge) and Jacksonville are two more, on their own pages. Fees are shown before state surcharges: Florida adds 2.5% of the permit fee, at least $4.00, under Florida Statutes 468.631 and 553.721, and some other states add small state fees of their own.

OfficeHow the schedule prices itThis job, before state surcharges
San Antonio, TX$28.75 flat, plus 4% technology and 4% development services surcharges$31.05
Franklin County, OH (unincorporated)$50.00 flat (schedule effective 2014); a $75 residential zoning certificate may also be required, depending on the township$50.00, or $125.00 with the zoning certificate
Santa Rosa County, FL$67.00 flat for a single-family house$67.00
Philadelphia, PA$69 flat to replace the covering on a one or two family dwelling$69.00
Oklahoma City, OK$90.00 for replacement or repair over 500 square feet$90.00
St. Johns County, FL$20 issuance, plus $16 for the first $1,000 and $3.76 for each further $1,000 or fraction$152.56
Manatee County, FLRoof Express, $153 ($118 with a virtual inspection)$153.00
Columbia, SC$20 for the first $5,000 and $4 for each further $1,000 or fraction, plus a $25 plan review fee$153.00
Orange County, FL$27 for the first $1,000 and $5 for each further $1,000 or fraction$182.00
Pinellas County, FL$180 for the first 20 squares and $1.50 for each further square$195.00
Fresno County, CA$201.47 per structure, including the pre-roof inspection$201.47
Leon County, FL$241.45 flat for a re-roof or roof re-cover$241.45
Hillsborough County, FL$250 flat, no plan review$250.00
Seminole County, FL$175 flat, plus the $75 administrative fee$250.00
San Bernardino County, CA$234 flat for a house, plus the $57 intake processing fee$291.00
Hernando County, FL$190 flat, plus the $93 technology fee and the $15 unlicensed contractor surcharge the county applies to all building permits$298.00
Clay County, FL$10 per 100 square feet of roof$300.00
Clark County, WA$220, plus $94 issuance; the $6.50 state building code fee is extra (county handout revised July 2018)$314.00
Riverside County, CA$335.50 fixed fee, rising to $344.20 for fees effective February 4, 2027$335.50
San Jose, CA$105 issuance plus $236 for up to two inspections$341.00
Aurora, CO$350 flat, plus city use tax on materials collected separately$350.00, plus use tax
Orange County, CA (unincorporated)$370 for fiscal year 2026-27$370.00
Worcester, MA$12 for each $1,000 of value or fraction, $100 minimum$384.00
Arlington, TX$325, plus a plan review fee of 35% of the permit fee$438.75
Santa Clara County, CA (unincorporated)$513 flat for a re-roof up to 5,000 square feet$513.00
Broward County, FL (unincorporated)The greater of $250 or 3.0% of job value$956.13

Where this job needs no permit. In a number of places a plain tear-off and re-shingle, with no sheathing replaced and no change of material, needs no permit and so costs nothing. Fort Worth’s residential guidance says “Shingle work does not require a permit,” though replacing decking or sheathing does. Baltimore County requires a permit for roof repairs “if 50 percent or more of the sheathing or deck is being replaced,” or for any roof repair on a property in a historic district or on its landmarks list. Virginia’s statewide code exempts “Replacement of an unlimited amount of roof covering or siding” on houses outside the highest wind areas, which is why Fauquier and Loudoun counties charge nothing for this job. Sussex County, Delaware counts roofing as permit work only when it “includes structural sheathing or change in material such as shingle to metal.” Montgomery County, Maryland and Pima County, Arizona are in the same group. Our guide to re-roofing without a permit lists the places whose rule is simply no; several conditional ones, such as Prince George’s and Fairfax counties, also exempt a plain re-shingle.

Some offices that do permit the job are not in the table because their fee for it cannot be worked out from what they publish: some price a re-roof from a value table whose upper bands our page for that office does not quote (Phoenix, Gilbert, Omaha), some price “per unit” without saying what a unit is (Marion and Pasco counties), and some do not say which line a re-roof falls under (Gwinnett County, the Town of Brookhaven).

Three ways offices price a roof

A flat fee is the most common rule in the table: 19 of the 26 charge one number for a house re-roof, sometimes plus a fixed processing or technology fee. On a flat schedule, a metal roof and an asphalt one cost the same to permit.

A share of the job’s value is the rule that makes the bill grow. Broward County takes 3.0% with a $250 floor, Worcester $12 per $1,000, and Orange County, Florida $5 for each $1,000 after the first. The same Cost vs. Value Report puts a metal roof replacement at a national average of $51,865; at that value Broward’s fee would be $1,555.95, Worcester’s $624.00 and Orange County’s $282.00, while every flat fee in the table would not move.

A rate on the roof’s area is rarer: Clay County charges $10 per 100 square feet and Pinellas County $1.50 per square beyond the first 20. A bigger or more complicated roof costs more there, a pricier material does not.

Whichever rule your office uses, if your roofer pulls the permit, ask whether the fee is in the price, and ask to see the permit, and the fee on it, before work starts.

The permit against the job

A re-roof is one of the larger checks a homeowner writes. The Remodeling 2025 Cost vs. Value Report estimates the national average cost of its 30-square asphalt tear-off at $31,871 and of a metal roof replacement at $51,865; local prices vary widely around those averages. Against $31,871, the fees in the table run from about 0.1% (San Antonio) to 3.0% (Broward County). For most houses the permit is the smallest line on the invoice, and the inspection it buys is the one independent check, required by law, that the underlayment, flashing and fastening went on the way the code requires.

© 2025 Zonda Media, a Delaware Corporation. Complete data from the Remodeling 2025 Cost vs. Value Report can be downloaded free at www.costvsvalue.com.

After a storm: the permit, the code and your policy

Storm repairs are where the permit and the insurance claim meet, and Florida, home to 11 of the 26 offices in our table, writes two rules into statute that change the math.

How much of the roof has to meet today’s code. Florida Statutes 553.844(5): “if an existing roofing system or roof section was built, repaired, or replaced in compliance with the requirements of the 2007 Florida Building Code, or any subsequent editions of the Florida Building Code, and 25 percent or more of such roofing system or roof section is being repaired, replaced, or recovered, only the repaired, replaced, or recovered portion is required to be constructed in accordance with the Florida Building Code in effect, as applicable.” The statute adds that a local government “may not adopt by ordinance an administrative or technical amendment to this exception.” So on a newer Florida roof, a large storm repair does not by itself force the whole roof up to the current code. On a roof built before the 2007 code, the older rule still applies; as Hillsborough County puts it, “If your roof was installed prior to the 2007 Florida Building Code and more than 25% of the total roof area or roof section of any building or structure is replaced or recovered in any 12-month period, the entire roof system or section must conform to the current codes.” Ask the permit office which side of that line your roof is on before you settle a claim.

Who pays for the code upgrade. Before issuing a homeowner’s policy, a Florida insurer must offer coverage “including costs necessary to meet applicable laws and ordinances regulating the construction, use, or repair of any property,” which “may be limited to 25 percent or 50 percent of the dwelling limit, as selected by the policyholder,” and which “applies only to repairs of the damaged portion of the structure unless the total damage to the structure exceeds 50 percent of the replacement cost of the structure” (Florida Statutes 627.7011(1)). And “Unless the insurer obtains the policyholder’s written refusal,” the policy “is deemed to include the law and ordinance coverage limited to 25 percent of the dwelling limit” (627.7011(2)). Whether you have 25 or 50 percent, or refused it, is on your policy’s declarations page. Read it before the adjuster’s visit, not after.

Outside Florida, ordinance or law coverage is a policy term, not a statutory offer we have verified state by state. Ask your agent whether your policy covers the cost of bringing the repaired roof up to code, and how much.

Two practical points apply everywhere. Keep the permit and the passed final inspection with your claim file and your house papers: an insurer, and later a buyer, may ask for them. And if a storm crew offers to skip the permit to save time, the permit is how the office confirms the repair meets the code, and it is the record that follows the house. What a permit skipped now costs later is in our after-the-fact permit fees guide.

Before you sign a roofing contract

  1. Ask the roofer whether your office requires a permit for this job, and who will pull it.
  2. Ask what the permit fee is and whether it is in the price.
  3. If the fee is a share of value, check that the value on the application matches the contract.
  4. Get the permit number before the tear-off starts, and keep the final inspection result when it passes.

For Maryland roofs, our Maryland re-roof guide covers each county’s rule and the state’s licensing for roofers. For every place we cover, the roof replacement permit page carries the rule, the fee as quoted, the office and the portal; start from the roof replacement permit index.

Sources

Get rule-change alerts

We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.

We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.

Look up your locality