Fence Permit in Raleigh, North Carolina
It depends
Sometimes, depending on the project
Before adding or moving a fence, before replacing 50 percent or more of an existing fence, and before any replacement, however small, that changes the fence's material, height or location.
Issued byCity of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center)
By Mario Bailey, verified against official sources
Quick answer
Raleigh issues its own residential permits: the City of Raleigh Planning and Development Department (Permits - Residential service unit and the Customer Service Center at One Exchange Plaza) takes building, zoning, electrical, mechanical and plumbing applications for property in the city (its pages also refer to the city's extraterritorial jurisdiction, and to recorded maps at either the Durham or the Wake County Register of Deeds). Wake County Permits and Inspections, which permitnotebook covers separately, serves only unincorporated Wake County plus contracted inspections for Knightdale, Rolesville, Wendell and Zebulon, so Wake County rules do not apply inside Raleigh, and the Charlotte pattern of county-issued city permits does not repeat here. Raleigh requires a zoning permit (not a building permit) for any new or relocated residential fence and for replacing 50 percent or more of an existing one. Replacing less than half of a fence like for like needs no permit, but a zoning permit is required at any size when the material, height or location changes. The application goes through the Permit and Development Portal with a residential permit application, a picture or diagram of the proposed fence and a site plan, and the city inspects after the fence is built.
Typical threshold: share of an existing residential fence being replaced with no change of material, height or location.
Who is pulling this permit?
Apply yourself
Hire it out
Sponsored
Fence installers usually handle any required permit as part of the job. Compare a few bids before you commit.
Compare fence installer quotes on Angi
Sponsored link. PermitNotebook may earn a fee if you request quotes through it. Partners never influence our permit data.
When a permit is usually needed
Before adding or moving a fence, before replacing 50 percent or more of an existing fence, and before any replacement, however small, that changes the fence's material, height or location.
What a fence permit costs in Raleigh
How Raleigh compares in North Carolina
| Jurisdiction | Permit needed? | Threshold |
|---|---|---|
| Charlotte | It depends | Before building a fence or wall along the border of, or bounding on, a city street or... |
| Durham | It depends | Only when the fence or wall is on a property in a designated flood plain, is used as a... |
| Mecklenburg County | It depends | typical residential fences (non-structural work costing $40,000 or less) need no county building permit; municipal zoning rules govern fence height and placement |
| Raleighthis page | It depends | share of an existing residential fence being replaced with no change of material, height or location |
How to apply in Raleigh
In Raleigh, most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.
What most fence permit applications include:
- For Raleigh, a fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
- That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
- Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
- For Raleigh, the same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
- For Raleigh, a fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).
General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. City of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center) sets the exact checklist for Raleigh.
Where to apply in Raleigh:
City of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center)
- Planning and Development Customer Service Center, One Exchange Plaza, Suite 400, Raleigh, NC 27601
- Phone: 919-996-2500
- Email: DowntownDS@raleighnc.gov
Fence Permit in Raleigh compared with nearby North Carolina localities
| Locality | Permit needed? | Threshold | What each North Carolina schedule says | Verified |
|---|---|---|---|---|
| Raleigh | It depends | share of an existing residential fence being replaced with no change of material, height or location | ...("A Zoning Permit is required for residential development activity."): $261.00 per... | |
| Charlotte | It depends | Before building a fence or wall along the border of, or bounding on, a city street or... | The Charlotte Department of Transportation fence and wall certificate is free: the... | |
| Durham | It depends | Only when the fence or wall is on a property in a designated flood plain, is used as a... | See schedule | |
| Greensboro | Not confirmed | Not confirmed | Not published | |
| Mecklenburg County | It depends | typical residential fences (non-structural work costing $40,000 or less) need no county building permit; municipal zoning rules govern fence height and placement | Not published |
Inspections and closing out your permit
In Raleigh, inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
- In Raleigh: inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
- In Raleigh: where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
- In Raleigh: that single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
- A fence built as a swimming-pool barrier breaks that light-touch pattern in Raleigh: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
- In Raleigh: that barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
- Gate hardware is inspected too in Raleigh: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Raleigh permit portal or by phone at 919-996-2500.
Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.
Your Fence Permit checklist for Raleigh
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: share of an existing residential fence being replaced with no change of material, height or location. Usually needed: Before adding or moving a fence, before replacing 50 percent or more of an existing fence, and before any replacement, however small, that changes the fence's material, height or location.
- Budget the fee. Zoning Permit Fee - 1&2 Family Dwellings Existing Structures ("A Zoning Permit is required for residential development activity."): $261.00 per review in the FY27 Development Fee Guide (effective for applications submitted July 1, 2026 through June 30, 2027; prior year $253.00); $271.00 with the 4% technology surcharge per the guide's Technology Fee Reference Guide. Official fee schedule.
- Apply. In Raleigh, most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own. Start at the Raleigh permit portal.
- Keep the office details handy. City of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center). Phone: 919-996-2500. Address: Planning and Development Customer Service Center, One Exchange Plaza, Suite 400, Raleigh, NC 27601.
- Plan for inspections. In Raleigh, inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
Compiled from the official sources on this page. Last checked .
Permitting activity in Raleigh
In 2025, Raleigh authorized permits for 4,738 new residential housing units (1,343 single-family, 3,395 in multi-family buildings), valued at $1.3B, down from 5,044 the year before. That works out to about 10 permits per 1,000 residents.
Source: U.S. Census Bureau, Building Permits Survey, 2025 annual data · population 473,139.
Frequently asked questions
- Do you need a fence permit in Raleigh?
- Raleigh issues its own residential permits: the City of Raleigh Planning and Development Department (Permits - Residential service unit and the Customer Service Center at One Exchange Plaza) takes building, zoning, electrical, mechanical and plumbing applications for property in the city (its pages also refer to the city's extraterritorial jurisdiction, and to recorded maps at either the Durham or the Wake County Register of Deeds). Wake County Permits and Inspections, which permitnotebook covers separately, serves only unincorporated Wake County plus contracted inspections for Knightdale, Rolesville, Wendell and Zebulon, so Wake County rules do not apply inside Raleigh, and the Charlotte pattern of county-issued city permits does not repeat here. Raleigh requires a zoning permit (not a building permit) for any new or relocated residential fence and for replacing 50 percent or more of an existing one. Replacing less than half of a fence like for like needs no permit, but a zoning permit is required at any size when the material, height or location changes. The application goes through the Permit and Development Portal with a residential permit application, a picture or diagram of the proposed fence and a site plan, and the city inspects after the fence is built. Share of an existing residential fence being replaced with no change of material, height or location. Always confirm with the office before starting.
- How much does a fence permit cost in Raleigh?
- Zoning Permit Fee - 1&2 Family Dwellings Existing Structures ("A Zoning Permit is required for residential development activity."): $261.00 per review in the FY27 Development Fee Guide (effective for applications submitted July 1, 2026 through June 30, 2027; prior year $253.00); $271.00 with the 4% technology surcharge per the guide's Technology Fee Reference Guide. See the official fee schedule for current amounts.
- Where do you apply for a fence permit in Raleigh?
- You can apply through the Raleigh permit portal or contact the City of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center) directly. The links are listed on this page.
- Can a homeowner pull a fence permit themselves in Raleigh?
- Under North Carolina law (N.C. Gen. Stat. 87-1(a), 87-1(b)(2), 87-14(a)(1), 160D-1113, 160D-1115): A North Carolina homeowner may pull the permit and do the work. G.S. 87-1(a) reaches general contracting only where the cost of the undertaking is $40,000 or more, and G.S. 87-1(b)(2) then exempts a person who constructs or alters a building on land that person owns, provided the building is intended solely for occupancy by that person and his family after completion and the person complies with G.S. 87-14. There is no outright ban on selling, but there is a look-back that works like one: if the building is not occupied solely by the person and his family for at least 12 months following completion, the statute presumes the person did not intend the building solely for that occupancy, which defeats the exemption. G.S. 87-14(a)(1) requires an owner claiming the exemption to execute a verified affidavit attesting that they own the property, that they will personally superintend and manage all aspects of the construction and will not delegate that duty to anyone unlicensed, and that they will be personally present for all inspections required by the State Building Code unless a licensed architect sealed the plans. The inspector transmits that affidavit to the Licensing Board, and if the Board determines the exemption was not available the building permit is revoked under G.S. 160D-1115. The exemption removes the general contractor license requirement only. It does not exempt the work from permits or inspections, and G.S. 160D-1113 provides that when a permit is held by an owner exempt under 87-1(b)(2), no inspection may be conducted without the owner present unless an architect sealed the plans. Confirm how Raleigh applies this before you apply.
From the Library
What else needs a permit in Raleigh
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Bathroom Remodel Permit | It depends | cost of the remodel in a single-family residence, where no load-bearing, plumbing-design, HVAC or electrical work is involved | FY27 Development Fee Guide (applications submitted July 1, 2026 through June 30, 2027)... |
| Deck Permit | It depends | Before building a new deck, screened porch, balcony or covered deck, or altering a... | ...through June 30, 2027), Building and Safety: "Minimum Trade Permit Fee" of $124.00... |
| Electrical Permit | It depends | Before an electrical service upgrade, adding circuits or outlets, installing an interior... | ...through June 30, 2027), Building and Safety: "Minimum Trade Permit Fee" of $124.00... |
| EV Charger Permit | Permit required | Any size | ...through June 30, 2027), Building and Safety: "Minimum Trade Permit Fee" of $124.00... |
| HVAC Permit | Permit required | Any size | ..."New or replacement HVAC/Water Heater/other appliance - Commercial" at $224.00 per... |
| Patio Permit | Permit required | Any size | ...through June 30, 2027), Building and Safety: "Minimum Trade Permit Fee" of $124.00... |
| Plumbing Permit | It depends | Before installing, extending or generally repairing any plumbing system, replacing... | ...1, 2026 through June 30, 2027) lists a "Plumbing Utility Inspection Fee" of $133.00... |
| Pool Permit | It depends | water a pool, spa or hot tub can hold | ...June 30, 2027) lists only "Swimming Pool - Commercial (Building only)" at $534.00... |
| Roof Replacement Permit | It depends | cost of the roof replacement work in a single-family residence | FY27 Development Fee Guide (applications submitted July 1, 2026 through June 30, 2027)... |
| Shed Permit | Permit required | Any size | ...permit): Zoning Permit Fee - 1&2 Family Dwellings Existing Structures, $261.00 per... |
| Solar Permit | Permit required | Any size | ...through June 30, 2027) lists only "Photovoltaic (Solar) - Commercial" at $543.00... |
| Water Heater Permit | It depends | Before installing a new water heater, or replacing one with a different fuel, energy... | ...work ("New or replacement HVAC/Water Heater/other appliance - Commercial"... |
Fence Permit in other North Carolina localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Raleigh documents; the office above sets the local rules.
How this fence permit page for Raleigh was verified. 2 official sources: raleighnc.gov, raleighnc.gov; fee schedule: official document. Last checked by Mario Bailey, not confirmed with City of Raleigh Planning and Development Department (Permits - Residential; Planning and Development Customer Service Center). Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Compare Fence Permit requirements across North Carolina localities