Michigan / Sterling Heights

Fence Permit in Sterling Heights, Michigan

Permit required

Yes, a permit is required

Before installing, replacing or extending a fence, including a pool barrier fence

Confirmed on official page Verified

Issued byCity of Sterling Heights Office of Building (Building Division), Office of City Development

By Mario Bailey, verified against official sources

Quick answer

A City of Sterling Heights fence permit (application prefix PF) is required for any residential fence, at any height. The Fence Permit Guidelines explain the structure: a fence under 7 feet is exempt from the permit requirement in Section 105.2 of the Michigan Building Code and Michigan Residential Code, but the city still issues its own land use fence permit, administered by the Building Department, so there is no height below which a homeowner can skip the city permit. The 7 foot line marks only where the state building-code exemption stops applying: at 7 feet and above a building permit is also required, and commercial fences at that height must comply with Section 312 of the Michigan Building Code. The application must state the fence material and height and be accompanied by a plot plan, mortgage survey, boundary survey or aerial image showing fence lengths and distances to lot lines. Residential fences may not exceed 6 feet in height without formal approval from the Board of Ordinance Appeals, and no fence may be installed in a front yard.

Who is pulling this permit?

Hire it out

Sponsored

Fence installers usually handle any required permit as part of the job. Compare a few bids before you commit.

Compare fence installer quotes on Angi

Sponsored link. PermitNotebook may earn a fee if you request quotes through it. Partners never influence our permit data.

When a permit is usually needed

Before installing, replacing or extending a fence, including a pool barrier fence

What a fence permit costs in Sterling Heights

Line item
fence permitBy formulaFence Permit Application 2026-2027 (revised 8/12/2026) fee box: WOOD $46, METAL $46, WIRE $46, PVC $46, MASONRY $134, SEPARATION $134. Payment and a plot plan are due at the time of application. No separate application fee is listed on the fence application.
Fee schedule in forceOfficial scheduleRead . Fees are the jurisdiction’s; we do not mark them up or estimate them.

How Sterling Heights compares in Michigan

No Michigan jurisdiction we have verified sets a size threshold for this permit, so what actually differs between them is the fee.

JurisdictionPermit needed?Typical fee
Ann ArborPermit required...handout (revised 3/3/2025) states a flat Fence Permit Fee of...
DetroitIt depends...PERMITS, New Buildings, Alterations, Repairs, And Additions, $2,000 or...
Grand RapidsPermit required...Planning Fees effective July 1, 2026, ZONING PERMITS: "Level I $25.00"...
Sterling Heightsthis pagePermit required...Permit Application 2026-2027 (revised 8/12/2026) fee box: WOOD $46, METAL...

How to apply in Sterling Heights

In Sterling Heights, most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.

What most fence permit applications include:

  • For Sterling Heights, a fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
  • That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
  • Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
  • For Sterling Heights, the same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
  • For Sterling Heights, a fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).

General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. City of Sterling Heights Office of Building (Building Division), Office of City Development sets the exact checklist for Sterling Heights.

Where to apply in Sterling Heights:

City of Sterling Heights Office of Building (Building Division), Office of City Development

Fence Permit in Sterling Heights compared with nearby Michigan localities

LocalityPermit needed?ThresholdWhat each Michigan schedule saysVerified
Sterling HeightsPermit requiredAny sizeFence Permit Application 2026-2027 (revised 8/12/2026) fee box: WOOD $46, METAL $46...
Ann ArborPermit requiredAny size...Guidelines handout (revised 3/3/2025) states a flat Fence Permit Fee of...
DetroitIt dependsfence height, for a fence outside a Special Review District...and RESIDENTIAL PERMITS, New Buildings, Alterations, Repairs, And Additions, $2,000...
Grand RapidsPermit requiredAny size...Fee Schedule, Planning Fees effective July 1, 2026, ZONING PERMITS: "Level I...

Inspections and closing out your permit

In Sterling Heights, inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.

  1. In Sterling Heights: inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
  2. In Sterling Heights: where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
  3. In Sterling Heights: that single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
  4. A fence built as a swimming-pool barrier breaks that light-touch pattern in Sterling Heights: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
  5. In Sterling Heights: that barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
  6. Gate hardware is inspected too in Sterling Heights: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).

Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Sterling Heights permit portal or by phone at 586-446-2360.

Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.

Frequently asked questions

Do you need a fence permit in Sterling Heights?
A City of Sterling Heights fence permit (application prefix PF) is required for any residential fence, at any height. The Fence Permit Guidelines explain the structure: a fence under 7 feet is exempt from the permit requirement in Section 105.2 of the Michigan Building Code and Michigan Residential Code, but the city still issues its own land use fence permit, administered by the Building Department, so there is no height below which a homeowner can skip the city permit. The 7 foot line marks only where the state building-code exemption stops applying: at 7 feet and above a building permit is also required, and commercial fences at that height must comply with Section 312 of the Michigan Building Code. The application must state the fence material and height and be accompanied by a plot plan, mortgage survey, boundary survey or aerial image showing fence lengths and distances to lot lines. Residential fences may not exceed 6 feet in height without formal approval from the Board of Ordinance Appeals, and no fence may be installed in a front yard. Always confirm with the City of Sterling Heights Office of Building (Building Division), Office of City Development before starting.
How much does a fence permit cost in Sterling Heights?
Fence Permit Application 2026-2027 (revised 8/12/2026) fee box: WOOD $46, METAL $46, WIRE $46, PVC $46, MASONRY $134, SEPARATION $134. Payment and a plot plan are due at the time of application. No separate application fee is listed on the fence application. See the official fee schedule for current amounts.
Where do you apply for a fence permit in Sterling Heights?
You can apply through the Sterling Heights permit portal or contact the City of Sterling Heights Office of Building (Building Division), Office of City Development directly. The links are listed on this page.
Can a homeowner pull a fence permit themselves in Sterling Heights?
Under Michigan law (MCL 339.2403(b), (c); MCL 339.2401(a)(iii), (b)(ii)(A); MCL 339.5737(3)(g); MCL 339.6107(2)(d); MCL 339.5819): Yes. A Michigan homeowner may pull the building permit and do the work on their own home without a residential builder license, because the licensing article both defines the trade to exclude them and exempts them outright. MCL 339.2401(a)(iii) says a residential builder is a person that erects a residential structure except for the person's own use and occupancy on the person's property, and MCL 339.2403(b) exempts an owner of property with reference to a structure on the property for the owner's own use and occupancy. Own use and occupancy is the condition, so the exemption does not cover building to sell, and MCL 339.2403(c) limits owners of rental property to maintenance and alteration of that property. The statute sets no cap on how many times a homeowner may use the exemption; the only frequency rule in the article catches purchase, substantial rehabilitation, and resale of the same structure more than twice in 1 calendar year, and MCL 339.2401(b)(ii)(A) exempts work for the person's own use and occupancy from even that. Homeowners can also pull their own trade permits: electrical work in a single family home and accompanying outbuildings owned and occupied or to be occupied by the person doing the work (MCL 339.5737(3)(g)), their own plumbing, building sewer, or private sewer in their single-family dwelling if a permit is secured (MCL 339.6107(2)(d)), and a heating or refrigerating system if the owner affirms in the permit application that they are or will become the owner and occupant (MCL 339.5819). Confirm how Sterling Heights applies this before you apply.

From the Library

What else needs a permit in Sterling Heights

Every other permit type we have verified for this jurisdiction, with the rule that applies here.

ProjectPermit needed?ThresholdTypical fee
Deck PermitPermit requiredAny sizeBuilding Permit Application 26-27 fee chart: 'Deck/Porch' $78.00, plus the...
Electrical PermitIt dependsBefore any electrical work, including work that reuses existing wiringElectrical Permit Application 26-27: non-refundable application fee $55.00, then per item
HVAC PermitPermit requiredAny sizeMechanical Permit Application 2026-2027: non-refundable application fee $55.00, then per...
Patio PermitIt dependsBefore pouring or replacing concrete other than a flat backyard patio poured on grade......permit is required, Building Permit Application 26-27 fee chart: 'Concrete' $78.00...
Plumbing PermitPermit requiredAny sizePlumbing Permit Application 2026-2027: non-refundable application fee $55.00, then per...
Pool PermitIt dependspool or hot tub side wall height above which the permit package appliesBuilding Permit Application 26-27 fee chart: 'Swimming pool (Above Ground)' $78.00...
Roof Replacement PermitPermit requiredAny sizeBuilding Permit Application 26-27 fee chart: 'Roof or Re-roof' $78.00, plus the...
Shed PermitIt dependsshed floor area above which a building permit is required...Permit Application 26-27 fee chart: 'Sheds (Between 50 - 200 sq. ft)' $78.00, plus...
Solar PermitPermit requiredAny sizeBuilding Permit Application 26-27 fee chart: 'Solar Panels' $153.00, plus the...

Fence Permit in other Michigan localities

Everything above, sourced

Code references

National and state model-code sections the general guidance on this page is drawn from. They are not Sterling Heights documents; the office above sets the local rules.

How this fence permit page for Sterling Heights was verified. 2 official sources: sterlingheights.gov, sterlingheights.gov; fee schedule: official document. Last checked by Mario Bailey, not confirmed with City of Sterling Heights Office of Building (Building Division), Office of City Development. Rules change; confirm before you build. How we verify.

Last checked: Report an error on this page

Compare Fence Permit requirements across Michigan localities

Fence permit rules nationwide

Permit required
Get quotes