Georgia / DeKalb County

Fence Permit in DeKalb County, Georgia

It depends

Sometimes, depending on the project

Before erecting a fence more than eight feet high. A fence at or under eight feet needs no building permit but still has to meet the zoning height caps in Table 5.3 and stay out of the public right-of-way.

Confirmed on official page Verified DeKalb County Department of Planning and Sustainability, Permits, Plan Review and Inspections Division

By Mario Bailey, verified against official sources

Quick answer

Residential building permits in unincorporated DeKalb County come from the Department of Planning and Sustainability, Permits, Plan Review and Inspections Division, at 178 Sams Street in Decatur. The county's own permits page states that a project inside an incorporated city is permitted by that city and not by the county, so these rules do not reach Atlanta, Avondale Estates, Brookhaven, Chamblee, Clarkston, Decatur, Doraville, Dunwoody, Lithonia, Pine Lake, Stone Mountain, Stonecrest or Tucker, and about 8.1 square miles of the City of Atlanta sits inside DeKalb. On fences, county code Sec. 7-30(d)(1)(A) exempts fences not over eight feet high from a building permit. The exemption is a building permit exemption only, and DeKalb zoning still caps a single family fence at four feet in the front and side corner yard and eight feet in the interior side and rear yard.

Typical threshold: height of the fence.

Who is pulling this permit?

Hire it out

Before you sign, ask the contractor:

  • Who pulls the permit, you or me, and is the permit fee included in the bid?
  • Which inspections will this job need, and who meets the inspector on site?
  • Is your contractor license active in this locality, and under which business name?

When a permit is usually needed

Before erecting a fence more than eight feet high. A fence at or under eight feet needs no building permit but still has to meet the zoning height caps in Table 5.3 and stay out of the public right-of-way.

What a fence permit costs in DeKalb County

Line item
fence permitBy formulaBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum Permit Fee; $50 Certificate of Occupancy or Certificate of Completion). Some commercial projects require Fire Review & Inspection Fees ($100 Fire Life Safety Review; $100 Fire Site Review; $100 Fire Inspection). Please note that additional fees may apply depending on the type of permit being submitted." DeKalb does not currently publish a full building permit fee schedule online; the fee schedule address printed on the application form no longer resolves to any fee document.

How DeKalb County compares in Georgia

JurisdictionPermit needed?Threshold
AtlantaPermit requiredNot specified
DeKalb Countythis pageIt dependsheight of the fence
Gwinnett CountyIt dependsheight of a fence; masonry and concrete fence walls follow a separate 4 foot limit

Closest fence permit thresholds outside Georgia

Jurisdictions we cover whose limit sits nearest DeKalb County's 8 feet in height.

How to apply in DeKalb County

Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.

What most fence permit applications include:

  • A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
  • That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
  • Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
  • The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
  • A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).

General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. DeKalb County Department of Planning and Sustainability, Permits, Plan Review and Inspections Division sets the exact checklist for DeKalb County.

Where to apply in DeKalb County:

DeKalb County Department of Planning and Sustainability, Permits, Plan Review and Inspections Division

Inspections and closing out your permit

Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.

  1. Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
  2. Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
  3. That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
  4. A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
  5. That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
  6. Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).

Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the DeKalb County permit portal or by phone at 404-371-2155 (option 3).

Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.

Frequently asked questions

Do you need a fence permit in DeKalb County?
Residential building permits in unincorporated DeKalb County come from the Department of Planning and Sustainability, Permits, Plan Review and Inspections Division, at 178 Sams Street in Decatur. The county's own permits page states that a project inside an incorporated city is permitted by that city and not by the county, so these rules do not reach Atlanta, Avondale Estates, Brookhaven, Chamblee, Clarkston, Decatur, Doraville, Dunwoody, Lithonia, Pine Lake, Stone Mountain, Stonecrest or Tucker, and about 8.1 square miles of the City of Atlanta sits inside DeKalb. On fences, county code Sec. 7-30(d)(1)(A) exempts fences not over eight feet high from a building permit. The exemption is a building permit exemption only, and DeKalb zoning still caps a single family fence at four feet in the front and side corner yard and eight feet in the interior side and rear yard. Height of the fence. Always confirm with the office before starting.
How much does a fence permit cost in DeKalb County?
Building Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum Permit Fee; $50 Certificate of Occupancy or Certificate of Completion). Some commercial projects require Fire Review & Inspection Fees ($100 Fire Life Safety Review; $100 Fire Site Review; $100 Fire Inspection). Please note that additional fees may apply depending on the type of permit being submitted." DeKalb does not currently publish a full building permit fee schedule online; the fee schedule address printed on the application form no longer resolves to any fee document. Contact the office for current amounts.
Where do you apply for a fence permit in DeKalb County?
You can apply through the DeKalb County permit portal or contact the DeKalb County Department of Planning and Sustainability, Permits, Plan Review and Inspections Division directly. The links are listed on this page.
Can a homeowner pull a fence permit themselves in DeKalb County?
Under Georgia law (O.C.G.A. 43-41-17(h); O.C.G.A. 43-14-13(d); O.C.G.A. 43-14-14): Georgia's contractor licensing law has a true owner builder exemption at O.C.G.A. 43-41-17(h), not 43-41-17(b). A property owner may construct a building on land the owner owns and act as his or her own contractor, personally providing direct supervision and management, but only if the finished building is intended solely for occupancy by the owner and the owner's family, firm, or corporation, is not for use by the general public, and is not offered for sale or lease. If the owner sold or transferred a self-built structure within the prior 24 months, measured from that structure's certificate of occupancy, the law presumes the new project was not really for personal occupancy and the exemption is unavailable without a license. The owner may not delegate supervision to any unlicensed person, and all work must still comply with county or municipal permitting and inspection requirements. For trade work, O.C.G.A. 43-14-13(d) separately allows an individual to install, alter, or repair plumbing, heating and air conditioning fixtures, and electrical or low-voltage wiring in a residential dwelling the individual owns or occupies, again in conformity with the codes and any local permit and inspection rules. Unlicensed trade work outside these exemptions is a misdemeanor punishable by up to a $1,000 fine or six months imprisonment or both (O.C.G.A. 43-14-14). Confirm how DeKalb County applies this before you apply.

From the Library

What else needs a permit in DeKalb County

Every other permit type we have verified for this jurisdiction, with the rule that applies here.

ProjectPermit needed?ThresholdTypical fee
Deck PermitPermit requiredNot specifiedBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...
Electrical PermitPermit requiredNot specifiedElectrical Permit Application (revised 07/09/2025): "Fee Schedule: MINIMUM FEE $120...
HVAC PermitPermit requiredNot specifiedMechanical Permit Application (revised 07/09/2025): "Fee Schedule: MINIMUM FEE $120.
Patio PermitPermit requiredNot specifiedBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...
Plumbing PermitPermit requiredNot specifiedPlumbing Permit Application: "Fee Schedule: MINIMUM FEE $120 Additional $200 for Fire...
Pool PermitIt dependsprefabricated pools installed entirely above groundBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...
Roof Replacement PermitPermit requiredNot specifiedBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...
Shed PermitPermit requiredNot specifiedBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...
Solar PermitPermit requiredNot specifiedBuilding Permit Application (revised 01/01/2025): "Total Minimum Fees $245 ($195 Minimum...

Fence Permit in other Georgia localities

Everything above, sourced

Code references

National and state model-code sections the general guidance on this page is drawn from. They are not DeKalb County documents; the office above sets the local rules.

Verified by a person against the sources above on , not confirmed with DeKalb County Department of Planning and Sustainability, Permits, Plan Review and Inspections Division. Rules change; confirm before you build. How we verify.

Last checked: Report an error on this page

Compare Fence Permit requirements across Georgia localities

Look up an existing DeKalb County permit record

It depends
Get quotes