Fence Permit in Gwinnett County, Georgia
It depends
Sometimes, depending on the project
Before erecting a fence taller than 8 feet, or a masonry or concrete fence wall taller than 4 feet.
By Mario Bailey, verified against official sources
Quick answer
Gwinnett County Planning and Development issues residential building permits only for UNINCORPORATED Gwinnett; the county's own page states "Gwinnett is home to 17 municipalities", naming Auburn, Berkeley Lake, Braselton, Buford, Dacula, Duluth, Grayson, Lawrenceville, Lilburn, Loganville, Mulberry, Norcross, Peachtree Corners, Rest Haven, Snellville, Sugar Hill and Suwanee, and none of them are covered by the rules below. Inside unincorporated Gwinnett a fence 8 feet or less in height needs no building permit. The Gwinnett County Construction Code writes the same exemption with a material limit: the 8 foot allowance excludes masonry and concrete construction, and a masonry or concrete wall acting as a fence, screen or barrier is exempt only up to 4 feet, with integral pilasters allowed up to 6 feet. The county asks residents to call Planning and Development before building brick columns or a front yard fence.
Typical threshold: height of a fence; masonry and concrete fence walls follow a separate 4 foot limit.
Who is pulling this permit?
Apply yourself
Hire it out
Before you sign, ask the contractor:
- Who pulls the permit, you or me, and is the permit fee included in the bid?
- Which inspections will this job need, and who meets the inspector on site?
- Is your contractor license active in this locality, and under which business name?
When a permit is usually needed
Before erecting a fence taller than 8 feet, or a masonry or concrete fence wall taller than 4 feet.
What a fence permit costs in Gwinnett County
How Gwinnett County compares in Georgia
| Jurisdiction | Permit needed? | Threshold |
|---|---|---|
| Atlanta | Permit required | Not specified |
| DeKalb County | It depends | height of the fence |
| Gwinnett Countythis page | It depends | height of a fence; masonry and concrete fence walls follow a separate 4 foot limit |
Closest fence permit thresholds outside Georgia
Jurisdictions we cover whose limit sits nearest Gwinnett County's 8 feet in height.
- Aurora, Colorado, fence height at which a building permit is required
- Contra Costa County, California, height of a fence, with concrete and masonry walls treated as walls rather than fences
- Corpus Christi, Texas, Fences taller than 7 feet in height need a building permit; fences 7 feet or less in height are on the city's published exemption list.
- Detroit, Michigan, fence height, for a fence outside a Special Review District
How to apply in Gwinnett County
Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.
What most fence permit applications include:
- A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
- That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
- Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
- The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
- A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).
General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. Gwinnett County Department of Planning and Development, Building Division sets the exact checklist for Gwinnett County.
Where to apply in Gwinnett County:
Gwinnett County Department of Planning and Development, Building Division
- Innovation Square, 446 West Crogan Street, Suite 300, Lawrenceville, GA 30046
- Phone: 678-518-6020
- Email: P&D-BuildingPermits@GwinnettCounty.com
Inspections and closing out your permit
Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
- Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
- Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
- That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
- A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
- That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
- Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Gwinnett County permit portal or by phone at 678-518-6020.
Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.
Your Fence Permit checklist for Gwinnett County
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: height of a fence; masonry and concrete fence walls follow a separate 4 foot limit. Usually needed: Before erecting a fence taller than 8 feet, or a masonry or concrete fence wall taller than 4 feet.
- Budget the fee. Planning and Development Fee Schedule, "Building Permit Fees (Effective July 1, 2024)", footer "Revised 05/23/2024". The schedule publishes no fence line item. A fence tall enough to need a permit is permitted as a residential structure and priced from the general building permit rules, so the amount has to be confirmed with the Permits Section at 678-518-6020. Official fee schedule.
- Apply. Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own. Start at the Gwinnett County permit portal.
- Keep the office details handy. Gwinnett County Department of Planning and Development, Building Division. Phone: 678-518-6020. Address: Innovation Square, 446 West Crogan Street, Suite 300, Lawrenceville, GA 30046.
- Plan for inspections. Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
Compiled from the official sources on this page. Last checked .
Frequently asked questions
- Do you need a fence permit in Gwinnett County?
- Gwinnett County Planning and Development issues residential building permits only for UNINCORPORATED Gwinnett; the county's own page states "Gwinnett is home to 17 municipalities", naming Auburn, Berkeley Lake, Braselton, Buford, Dacula, Duluth, Grayson, Lawrenceville, Lilburn, Loganville, Mulberry, Norcross, Peachtree Corners, Rest Haven, Snellville, Sugar Hill and Suwanee, and none of them are covered by the rules below. Inside unincorporated Gwinnett a fence 8 feet or less in height needs no building permit. The Gwinnett County Construction Code writes the same exemption with a material limit: the 8 foot allowance excludes masonry and concrete construction, and a masonry or concrete wall acting as a fence, screen or barrier is exempt only up to 4 feet, with integral pilasters allowed up to 6 feet. The county asks residents to call Planning and Development before building brick columns or a front yard fence. Height of a fence; masonry and concrete fence walls follow a separate 4 foot limit. Always confirm with the office before starting.
- How much does a fence permit cost in Gwinnett County?
- Planning and Development Fee Schedule, "Building Permit Fees (Effective July 1, 2024)", footer "Revised 05/23/2024". The schedule publishes no fence line item. A fence tall enough to need a permit is permitted as a residential structure and priced from the general building permit rules, so the amount has to be confirmed with the Permits Section at 678-518-6020. See the official fee schedule for current amounts.
- Where do you apply for a fence permit in Gwinnett County?
- You can apply through the Gwinnett County permit portal or contact the Gwinnett County Department of Planning and Development, Building Division directly. The links are listed on this page.
- Can a homeowner pull a fence permit themselves in Gwinnett County?
- Under Georgia law (O.C.G.A. 43-41-17(h); O.C.G.A. 43-14-13(d); O.C.G.A. 43-14-14): Georgia's contractor licensing law has a true owner builder exemption at O.C.G.A. 43-41-17(h), not 43-41-17(b). A property owner may construct a building on land the owner owns and act as his or her own contractor, personally providing direct supervision and management, but only if the finished building is intended solely for occupancy by the owner and the owner's family, firm, or corporation, is not for use by the general public, and is not offered for sale or lease. If the owner sold or transferred a self-built structure within the prior 24 months, measured from that structure's certificate of occupancy, the law presumes the new project was not really for personal occupancy and the exemption is unavailable without a license. The owner may not delegate supervision to any unlicensed person, and all work must still comply with county or municipal permitting and inspection requirements. For trade work, O.C.G.A. 43-14-13(d) separately allows an individual to install, alter, or repair plumbing, heating and air conditioning fixtures, and electrical or low-voltage wiring in a residential dwelling the individual owns or occupies, again in conformity with the codes and any local permit and inspection rules. Unlicensed trade work outside these exemptions is a misdemeanor punishable by up to a $1,000 fine or six months imprisonment or both (O.C.G.A. 43-14-14). Confirm how Gwinnett County applies this before you apply.
From the Library
What else needs a permit in Gwinnett County
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
Planning and Development Fee Schedule, "Building Permit Fees (Effective July 1, 2024)", footer "Revised 05/23/2024", for every permit type below. The fee column shows what differs by project.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Deck Permit | Permit required | Not specified | "Other Building Permit Fees: Minor Renovation Projects (valued less than $75,000) |... |
| Electrical Permit | It depends | Not specified | The schedule has no separate electrical trade permit line |
| HVAC Permit | It depends | Not specified | The schedule has no separate mechanical trade permit line |
| Plumbing Permit | It depends | Not specified | The schedule has no separate plumbing trade permit line |
| Pool Permit | It depends | prefabricated pools installed entirely above ground that also hold no more than 5,000 gallons | The schedule publishes no swimming pool line item. |
| Roof Replacement Permit | Permit required | Not specified | "Other Building Permit Fees: Minor Renovation Projects (valued less than $75,000) |... |
| Shed Permit | It depends | floor area of a one-story detached accessory structure that contains no electrical or plumbing system | The schedule has no accessory-building line item |
| Solar Permit | Permit required | Not specified | The schedule grants a discount rather than setting a separate solar price: "Green... |
Fence Permit in other Georgia localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Gwinnett County documents; the office above sets the local rules.
Verified by a person against the sources above on , not confirmed with Gwinnett County Department of Planning and Development, Building Division. Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Permit office
Gwinnett County Department of Planning and Development, Building Division
678-518-6020Permit portalCompare
Fence Permit across Georgia