Shed Permit in Fresno County, California
It depends
Sometimes, depending on the project
Before building a detached shed larger than 120 square feet in unincorporated Fresno County
By Mario Bailey, verified against official sources
Quick answer
Fresno County exempts a one-story detached tool or storage shed of 120 square feet or less from a building permit outright. Between that size and the county's own added exemption, Title 15 Section 15.08.020.A Item No. 18 exempts detached one-story Group U accessory structures up to 240 square feet of floor or column area and 380 square feet of roof area with a maximum ten-foot wall or post height, but that exemption is not automatic: it is applied for through the Citizens Portal with a site plan, elevation sheet, operational statement and owner-builder disclosure or contractor license, and it carries a fee and an inspection. Anything larger than the Item No. 18 limits needs a full building permit. This applies to unincorporated Fresno County only, not to the City of Fresno, the City of Clovis or the county's other incorporated cities.
Typical threshold: One-story detached accessory structures used as tool and storage sheds, playhouses and similar uses are exempt from a building permit when the floor area is not greater than 120 square feet.
Who is pulling this permit?
Apply yourself
Hire it out
Before you sign, ask the contractor:
- Who pulls the permit, you or me, and is the permit fee included in the bid?
- Which inspections will this job need, and who meets the inspector on site?
- Is your contractor license active in this locality, and under which business name?
When a permit is usually needed
Before building a detached shed larger than 120 square feet in unincorporated Fresno County
What a shed permit costs in Fresno County
How Fresno County compares in California
| Jurisdiction | Permit needed? | Threshold |
|---|---|---|
| Alameda County | It depends | Floor area of a one-story detached tool or storage shed accessory to a house, at which the building permit exemption stops |
| Contra Costa County | It depends | floor area of a one-story detached accessory structure |
| Fresno Countythis page | It depends | One-story detached accessory structures used as tool and storage sheds, playhouses and similar uses are exempt from a building permit when the floor area is not greater than 120 square feet |
| Los Angeles | It depends | one-story shed under 120 sq ft and under 12 ft in height with no electrical or plumbing does not require a permit |
| Los Angeles County | It depends | gross floor area of a one-story detached accessory building; the exemption also requires the height not to exceed 12 feet and the maximum roof projection not to exceed 24 inches |
| Orange County | It depends | One-story detached accessory buildings used as tool and storage sheds, play houses and similar uses are exempt from a building permit only when the floor area does not exceed 120 square feet and the structure sits at least 3 feet from the property line and 6 feet from other buildings on the same property |
| Riverside County | It depends | A one-story detached accessory structure with a floor area of 120 square feet or less is exempt from a building permit, other than a storm shelter |
Closest shed permit thresholds outside California
Jurisdictions we cover whose limit sits nearest Fresno County's 120 sq ft.
- Aurora, Colorado, shed floor area at which a building permit is required
- Baltimore County, Maryland, accessory structure floor area
- Boston, Massachusetts, one-story detached accessory sheds used for tools or storage are exempt if floor area does not exceed 120 sq ft
- Chandler, Arizona, One-story detached accessory structures (storage sheds, open-air ramadas) with floor area of 120 sq ft or less and height of 7 ft or less (up to 9 ft with 2 additional feet of setback per additional foot of height) are exempt if not connected to any electrical, gas, or water utility; exceeding either limit or connecting a utility requires a building permit.
How to apply in Fresno County
A residential shed permit application, once the shed is large enough to require one, is a set of construction documents that show what will be built and prove it meets the adopted residential code. In practice that means a written permit application, a scaled site plan locating the shed and its distances to the property lines, and construction documents covering the shed's foundation or anchoring system and its framing.
What most shed permit applications include:
- A written permit application identifying the proposed work and describing the property by its address or legal description, filed with the building department before construction begins (IRC R105.3).
- A scaled site plan showing the shed's size and location and its dimensioned distances to all property lines so required setbacks can be verified before the permit is issued (IRC R106.2).
- Construction documents showing the shed's foundation: freestanding accessory structures at or under the code's small-structure size and eave-height limits (600 square feet and a 10 foot eave height in the model code) are exempt from continuous footings but must still be shown supported on undisturbed soil or engineered fill and anchored to resist wind-induced uplift and overturning (IRC R403.1).
- Where the shed does sit on a continuous foundation with a wood sill plate, anchor bolt or approved strap details tying the sill plate to the foundation (IRC R403.1.6).
- Roof framing details showing the rafter-to-wall or truss-to-wall connections, since even a shed exempt from continuous footings must be anchored to resist wind-induced uplift and overturning (IRC R403.1; R802.11).
General submittal guidance from IRC R105.3 (permit application), R106.2 (site plan), R403.1 (footings and anchorage for accessory structures), and R403.1.6 (sill anchorage), 2021 IRC. Source. Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety sets the exact checklist for Fresno County.
Where to apply in Fresno County:
Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety
- 2220 Tulare Street, Suite A, Fresno, CA 93721 (Development Services and Capital Projects Division; the offices are in Annex A and Annex B of the Fresno County Plaza at Tulare and M streets)
- Phone: 559-600-4570 (plan check and permit information); 559-600-4560 (building inspection); 559-600-4131 (24 hour inspection request line)
- Email: PlanCheckBuildingCode2@fresnocountyca.gov
Inspections and closing out your permit
A permitted shed is inspected in stages as it goes up: the foundation or the anchors that hold it down before they are covered, the framing before it is enclosed, and a final inspection once the shed is finished. Each stage checks the items that would be hidden or unsafe if skipped.
- Foundation or anchor inspection: called after any required footings, piers, or ground anchors are set and any forms or reinforcing steel are in place, but before concrete is placed, so the foundation or anchoring system can be verified before it is covered (IRC R109.1.1).
- Frame inspection: after the shed is framed, sheathed, and braced, the inspector checks the framing, bracing, fasteners, and the roof connections that resist wind uplift, before those elements are covered (IRC R109.1.4 frame inspection; R403.1 anchorage).
- Final inspection: made after the permitted work is complete and before the shed is used; work may not proceed past any inspection stage without the building official's approval (IRC R109.1.6 final inspection; R109.4 approval required).
- For a pre-fabricated or kit shed, the manufacturer's installation instructions must be on site at the time of inspection so the inspector can confirm the anchoring and assembly match the design (IRC R106.1.2).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Fresno County permit portal or by phone at 559-600-4570 (plan check and permit information); 559-600-4560 (building inspection); 559-600-4131 (24 hour inspection request line).
Inspection sequence from IRC R109.1.1 (foundation inspection), R109.1.4 (frame inspection), R109.1.6 (final inspection), and R106.1.2 (manufacturer's instructions on site), 2021 IRC. Source. An open permit left un-inspected can surface later in a title search or home sale.
Your Shed Permit checklist for Fresno County
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: One-story detached accessory structures used as tool and storage sheds, playhouses and similar uses are exempt from a building permit when the floor area is not greater than 120 square feet. Usually needed: Before building a detached shed larger than 120 square feet in unincorporated Fresno County.
- Budget the fee. For a shed between 120 and 240 square feet the county charges for the Item No. 18 exemption application, not a building permit: 'The cost for the permit will be $153.44 (a $21.85 internet fee is added for permits applied for online).' A shed that exceeds the exemption is a building permit priced from the Table of Construction Valuation line 'Private Garages, Residential Accessory Structures: (U) Wood Frame Type VB $38.00' (per square foot of valuation), run through Section 2501, which for FY 2026-27 has a $166.28 minimum charge. Official fee schedule.
- Apply. A residential shed permit application, once the shed is large enough to require one, is a set of construction documents that show what will be built and prove it meets the adopted residential code. In practice that means a written permit application, a scaled site plan locating the shed and its distances to the property lines, and construction documents covering the shed's foundation or anchoring system and its framing. Start at the Fresno County permit portal.
- Keep the office details handy. Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety. Phone: 559-600-4570 (plan check and permit information); 559-600-4560 (building inspection); 559-600-4131 (24 hour inspection request line). Address: 2220 Tulare Street, Suite A, Fresno, CA 93721 (Development Services and Capital Projects Division; the offices are in Annex A and Annex B of the Fresno County Plaza at Tulare and M streets).
- Plan for inspections. A permitted shed is inspected in stages as it goes up: the foundation or the anchors that hold it down before they are covered, the framing before it is enclosed, and a final inspection once the shed is finished. Each stage checks the items that would be hidden or unsafe if skipped.
Compiled from the official sources on this page. Last checked .
Frequently asked questions
- Do you need a shed permit in Fresno County?
- Fresno County exempts a one-story detached tool or storage shed of 120 square feet or less from a building permit outright. Between that size and the county's own added exemption, Title 15 Section 15.08.020.A Item No. 18 exempts detached one-story Group U accessory structures up to 240 square feet of floor or column area and 380 square feet of roof area with a maximum ten-foot wall or post height, but that exemption is not automatic: it is applied for through the Citizens Portal with a site plan, elevation sheet, operational statement and owner-builder disclosure or contractor license, and it carries a fee and an inspection. Anything larger than the Item No. 18 limits needs a full building permit. This applies to unincorporated Fresno County only, not to the City of Fresno, the City of Clovis or the county's other incorporated cities. One-story detached accessory structures used as tool and storage sheds, playhouses and similar uses are exempt from a building permit when the floor area is not greater than 120 square feet. Always confirm with the office before starting.
- How much does a shed permit cost in Fresno County?
- For a shed between 120 and 240 square feet the county charges for the Item No. 18 exemption application, not a building permit: 'The cost for the permit will be $153.44 (a $21.85 internet fee is added for permits applied for online).' A shed that exceeds the exemption is a building permit priced from the Table of Construction Valuation line 'Private Garages, Residential Accessory Structures: (U) Wood Frame Type VB $38.00' (per square foot of valuation), run through Section 2501, which for FY 2026-27 has a $166.28 minimum charge. See the official fee schedule for current amounts.
- Where do you apply for a shed permit in Fresno County?
- You can apply through the Fresno County permit portal or contact the Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety directly. The links are listed on this page.
- Can a homeowner pull a shed permit themselves in Fresno County?
- Under California law (Business & Professions Code 7044(a)-(b); Business & Professions Code 7031.5): California exempts an owner-builder from contractor licensing when the owner personally performs the work, or uses only wage employees, on their own property and does not intend the improvements for sale. A homeowner may also directly hire licensed trade contractors for up to four single-family residences a year, or improve their own principal residence without a general contractor's license, as long as they have actually lived there for the 12 months before the work is finished. Selling a self-built structure within one year of completion creates a rebuttable presumption that it was built for sale, which defeats the exemption, and selling five or more structures within a year makes that presumption conclusive. Separately, every city or county that requires a building permit must also require the applicant to file a signed statement giving their contractor license number or the basis of their claimed exemption; a false or missing statement carries a $500 civil penalty. Confirm how Fresno County applies this before you apply.
From the Library
What else needs a permit in Fresno County
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Deck Permit | Permit required | Not specified | No flat deck permit fee is published. |
| Electrical Permit | Permit required | Not specified | Section 2511 Electrical Code Fees, FY 2026-27: Issuing permits $42.77 each |
| Fence Permit | It depends | Fences not over 7 feet high are on the county's published list of work exempt from a building permit | The Master Schedule of Fees publishes no flat fence permit fee. |
| HVAC Permit | Permit required | Not specified | Section 2510 Mechanical Code Fees, FY 2026-27: Issuing each permit $42.77 |
| Patio Permit | Permit required | Not specified | No flat patio permit fee is published. |
| Plumbing Permit | Permit required | Not specified | Section 2512 Plumbing Code Fees, FY 2026-27: Alteration, repair or addition of a drain... |
| Pool Permit | It depends | Prefabricated pools accessory to a Group R-3 occupancy are exempt from a building permit only when they are less than 24 inches deep, hold not more than 5,000 gallons, and are installed entirely above ground | Special Services Fees item 21, 'Installation of private swimming pool or spa includes... |
| Roof Replacement Permit | Permit required | Not specified | Special Services Fees item 16, 'Re-roofing of existing buildings including pre-roof... |
| Solar Permit | Permit required | Not specified | The Master Schedule of Fees has no solar or photovoltaic line item anywhere in Section... |
Shed Permit in other California localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Fresno County documents; the office above sets the local rules.
- IRC R105.3 (permit application), R106.2 (site plan), R403.1 (footings and anchorage for accessory structures), and R403.1.6 (sill anchorage), 2021 IRC
- IRC R109.1.1 (foundation inspection), R109.1.4 (frame inspection), R109.1.6 (final inspection), and R106.1.2 (manufacturer's instructions on site), 2021 IRC
Verified by a person against the sources above on , not confirmed with Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety. Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Compare Shed Permit requirements across California localities
Permit office
Department of Public Works and Planning, Development Services and Capital Projects Division, Building and Safety
559-600-4570 (plan check and permit information); 559-600-4560 (building inspection); 559-600-4131 (24 hour inspection request line)Permit portal