Fence Permit in Riverside County, California
It depends
Sometimes, depending on the project
Before building a fence over 7 feet high, or a block wall over 4 feet high, in unincorporated Riverside County
By Mario Bailey, verified against official sources
Quick answer
Riverside County exempts fences 7 feet or less in height from a building permit, but a block wall is exempt only up to 4 feet, so a taller masonry wall needs a permit even when a wood or wire fence of the same height would not. The exemption is written into the county's own amendment of California Residential Code Section R105.2 in Ordinance No. 457. These rules cover unincorporated Riverside County only; the county's incorporated cities, including Riverside, Moreno Valley, Corona, Temecula, Murrieta, Menifee, Hemet, Jurupa Valley, Indio, Palm Desert, Perris, and Lake Elsinore, run their own building departments and set their own rules.
Typical threshold: Fences 7 feet or less in height are exempt from a building permit, except block walls, which are exempt only up to 4 feet in height.
Who is pulling this permit?
Apply yourself
Hire it out
Before you sign, ask the contractor:
- Who pulls the permit, you or me, and is the permit fee included in the bid?
- Which inspections will this job need, and who meets the inspector on site?
- Is your contractor license active in this locality, and under which business name?
When a permit is usually needed
Before building a fence over 7 feet high, or a block wall over 4 feet high, in unincorporated Riverside County
What a fence permit costs in Riverside County
How Riverside County compares in California
Across the California jurisdictions we have verified, the same threshold runs from 6 to 7, so a project that is exempt here may still need a permit one county over.
| Jurisdiction | Permit needed? | Threshold |
|---|---|---|
| Alameda County | It depends | Permit exemption height limit: 7 feet for fences of light materials, 5 feet 9 inches for fences of concrete, masonry, or similar heavy materials |
| Contra Costa County | It depends | height of a fence, with concrete and masonry walls treated as walls rather than fences |
| Fresno County | It depends | Fences not over 7 feet high are on the county's published list of work exempt from a building permit |
| Los Angeles County | It depends | height of a fence or freestanding block wall measured from the lowest adjacent grade; a masonry or concrete fence must also be set back from a public way at least a distance equal to its height to stay exempt |
| Orange County | It depends | Fences and freestanding walls over six feet in height require a building permit; fences not over six feet are exempt unless a permit was required as a condition of project approval |
| Riverside Countythis page | It depends | Fences 7 feet or less in height are exempt from a building permit, except block walls, which are exempt only up to 4 feet in height |
| San Diego County | It depends | Fences and freestanding masonry walls over 6 feet in height need a building permit; open fences up to 8 feet are also exempt if the uppermost two feet is only barbed or razor wire on angled supports. |
Closest fence permit thresholds outside California
Jurisdictions we cover whose limit sits nearest Riverside County's 7 feet.
- Clark County, Washington, Fences seven feet or less in height do not require a permit; fences over 7 feet in height require a Fence/Retaining Wall (FRT) permit.
- Tacoma, Washington, fences 7 feet or under in height do not require a building permit; fences over 7 feet require a permit
- Bellevue, Washington, fences over 8 feet in height require a building permit; fences 8 feet or under do not require a permit
- Clark County, Nevada, fences over 6 feet in height require a building permit; all fences require a Fence/Wall Permit (Form BPA-005) regardless of height
How to apply in Riverside County
Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.
What most fence permit applications include:
- A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
- That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
- Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
- The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
- A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).
General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. Riverside County Building and Safety Department (Transportation and Land Management Agency) sets the exact checklist for Riverside County.
Where to apply in Riverside County:
Riverside County Building and Safety Department (Transportation and Land Management Agency)
- 4080 Lemon Street, 9th Floor, Riverside, CA 92501 (mailing: P.O. Box 1629, Riverside, CA 92502-1629)
- Phone: 951-955-1800
- Email: records@rivco.org
Inspections and closing out your permit
Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
- Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
- Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
- That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
- A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
- That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
- Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Riverside County permit portal or by phone at 951-955-1800.
Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.
Your Fence Permit checklist for Riverside County
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: Fences 7 feet or less in height are exempt from a building permit, except block walls, which are exempt only up to 4 feet in height. Usually needed: Before building a fence over 7 feet high, or a block wall over 4 feet high, in unincorporated Riverside County.
- Budget the fee. Fences Over 7' (BXX-FENC): $635.40 fixed fee, per Appendix A to Ordinance No. 457 as amended by Ordinance No. 457.108 (adopted June 23, 2026, effective July 23, 2026); the same table steps this to $652.40 effective February 4, 2027. A block wall is priced separately as Garden Wall, County Standard (BWL-GWAL): $586.60 for up to 100 linear feet plus $191.00 for each additional 100 feet. The department's still-posted 284-035 fee sheet (09/2025) shows the older figures of $602.20 and $443.30. Official fee schedule.
- Apply. Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own. Start at the Riverside County permit portal.
- Keep the office details handy. Riverside County Building and Safety Department (Transportation and Land Management Agency). Phone: 951-955-1800. Address: 4080 Lemon Street, 9th Floor, Riverside, CA 92501 (mailing: P.O. Box 1629, Riverside, CA 92502-1629).
- Plan for inspections. Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.
Compiled from the official sources on this page. Last checked .
Frequently asked questions
- Do you need a fence permit in Riverside County?
- Riverside County exempts fences 7 feet or less in height from a building permit, but a block wall is exempt only up to 4 feet, so a taller masonry wall needs a permit even when a wood or wire fence of the same height would not. The exemption is written into the county's own amendment of California Residential Code Section R105.2 in Ordinance No. 457. These rules cover unincorporated Riverside County only; the county's incorporated cities, including Riverside, Moreno Valley, Corona, Temecula, Murrieta, Menifee, Hemet, Jurupa Valley, Indio, Palm Desert, Perris, and Lake Elsinore, run their own building departments and set their own rules. Fences 7 feet or less in height are exempt from a building permit, except block walls, which are exempt only up to 4 feet in height. Always confirm with the office before starting.
- How much does a fence permit cost in Riverside County?
- Fences Over 7' (BXX-FENC): $635.40 fixed fee, per Appendix A to Ordinance No. 457 as amended by Ordinance No. 457.108 (adopted June 23, 2026, effective July 23, 2026); the same table steps this to $652.40 effective February 4, 2027. A block wall is priced separately as Garden Wall, County Standard (BWL-GWAL): $586.60 for up to 100 linear feet plus $191.00 for each additional 100 feet. The department's still-posted 284-035 fee sheet (09/2025) shows the older figures of $602.20 and $443.30. See the official fee schedule for current amounts.
- Where do you apply for a fence permit in Riverside County?
- You can apply through the Riverside County permit portal or contact the Riverside County Building and Safety Department (Transportation and Land Management Agency) directly. The links are listed on this page.
- Can a homeowner pull a fence permit themselves in Riverside County?
- Under California law (Business & Professions Code 7044(a)-(b); Business & Professions Code 7031.5): California exempts an owner-builder from contractor licensing when the owner personally performs the work, or uses only wage employees, on their own property and does not intend the improvements for sale. A homeowner may also directly hire licensed trade contractors for up to four single-family residences a year, or improve their own principal residence without a general contractor's license, as long as they have actually lived there for the 12 months before the work is finished. Selling a self-built structure within one year of completion creates a rebuttable presumption that it was built for sale, which defeats the exemption, and selling five or more structures within a year makes that presumption conclusive. Separately, every city or county that requires a building permit must also require the applicant to file a signed statement giving their contractor license number or the basis of their claimed exemption; a false or missing statement carries a $500 civil penalty. Confirm how Riverside County applies this before you apply.
From the Library
What else needs a permit in Riverside County
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Deck Permit | It depends | A deck is exempt only if it is 200 square feet or less in area, no more than 30 inches above grade at any point, not attached to a dwelling or townhouse, and does not serve the required exit door | Deck County Standard (BPT-DEKCS): $586.60 fixed fee |
| Electrical Permit | Permit required | Not specified | Residential Electrical (BEL-RELE): $448.20 fixed fee |
| HVAC Permit | Permit required | Not specified | Residential Mechanical (BME-RMEC): $274.30 fixed fee, per Appendix A to Ordinance No. |
| Patio Permit | Permit required | Not specified | Lattice Patio Cover County Standard (BPT-LPAT): $411.90 fixed fee |
| Plumbing Permit | Permit required | Not specified | Residential Plumbing (BPL-RPLU): $274.30 fixed fee, per Appendix A to Ordinance No. |
| Pool Permit | It depends | A prefabricated swimming pool less than 24 inches deep is exempt from a building permit; the department's handout adds that it must be above ground, hold no more than 5,000 gallons, and be at a single-family property | Residential Pool/Spa (BSP-RES): $999.30 fixed fee |
| Roof Replacement Permit | It depends | Roof repairs or replacements covering less than 25 percent of the legally existing roof area are exempt, provided the work does not involve the underlying framing and does not occur more than once in a 12-month period | Roofing and/or Deck Replacement (BRR-RROO): $335.50 fixed fee, per Appendix A to... |
| Shed Permit | It depends | A one-story detached accessory structure with a floor area of 120 square feet or less is exempt from a building permit, other than a storm shelter | Accessory Building 1,000 SQ FT (BAS-ACB1): $1,628.78 deposit |
| Solar Permit | Permit required | Not specified | Roof Mount Solar Residential (BEL-RSLRR), described in the schedule as 'Mandated by AB... |
Fence Permit in other California localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Riverside County documents; the office above sets the local rules.
Verified by a person against the sources above on , not confirmed with Riverside County Building and Safety Department (Transportation and Land Management Agency). Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Compare Fence Permit requirements across California localities
Permit office
Riverside County Building and Safety Department (Transportation and Land Management Agency)
951-955-1800Permit portal