Washington / Thurston County

Fence Permit in Thurston County, Washington

By Mario Bailey Last checked 2026-07-19 · 1 official source

Verified against official sources Confirmed on official page

It depends

Quick answer

Thurston County exempts fences 8 feet tall or shorter from a building permit. Fences taller than 8 feet require a permit from the Building Development Center. This county threshold is higher than the 7 foot baseline used in many jurisdictions.

Typical threshold: Fences 8 feet tall or shorter are exempt from a county building permit.

8 ft
Threshold illustrated: 8 ft. Whether Thurston County requires a permit above or below this measurement is stated in the verdict on this page, verified 2026-07-19.

Who is pulling this permit?

Hire it out

Before you sign, ask the contractor:

  • Who pulls the permit, you or me, and is the permit fee included in the bid?
  • Which inspections will this job need, and who meets the inspector on site?
  • Is your contractor license active in this locality, and under which business name?
Want a pro to handle this permit? Request free help

Tell us where your project stands. Free to ask; no obligation.

Where we have a vetted local pro who handles permits in Thurston County, we connect you; otherwise we reply with the exact steps and office links for your situation. PermitNotebook is not a government agency and does not file permits. This is a free referral request; we may earn a fee if you hire a pro we introduce. Partners never influence our permit data. Privacy policy.

When a permit is usually needed

Fences taller than 8 feet

What fence permit costs in Thurston County

Building permit and plan review fees are valuation based; see the county 2026 Residential Building Fee Guide.

Official fee schedule

How Thurston County compares in Washington

Across the Washington jurisdictions we have verified, the same threshold runs from 6 to 8, so a project that is exempt here may still need a permit one county over.

JurisdictionPermit needed?Threshold
BellevueIt dependsfences over 8 feet in height require a building permit; fences 8 feet or under do not require a permit
Clark CountyIt dependsFences seven feet or less in height do not require a permit; fences over 7 feet in height require a Fence/Retaining Wall (FRT) permit.
King CountyIt dependsfences 6 feet or less do not require a building permit in unincorporated King County; fences over 6 feet require a permit
Pierce CountyIt dependsFences 6 feet or less in height, measured from grade, are exempt; taller fences require a building permit.
SeattleIt dependsfences under 8 feet with no masonry or concrete elements exceeding 6 feet do not require a permit
Snohomish CountyIt dependsfences 8 feet or less in height exempt, provided they have no masonry or concrete elements above 6 feet (wire strands atop an 8-foot fence are excluded from the height measurement); taller fences, or fences with masonry/concrete above 6 feet, require a permit
Thurston Countythis pageIt dependsFences 8 feet tall or shorter are exempt from a county building permit.

Closest fence permit thresholds outside Washington

Jurisdictions we cover whose limit sits nearest Thurston County's 8 feet.

  • Polk County, Florida, Solid fences over eight feet high and all masonry walls or fences with masonry pilasters require a permit; chain link fences of any height and stockade fences up to eight feet high are exempt.
  • Clark County, Nevada, fences over 6 feet in height require a building permit; all fences require a Fence/Wall Permit (Form BPA-005) regardless of height
  • Gilbert, Arizona, Gilbert's amended IRC R105.2 exempts only fences not over 3 feet high; the Town's pool barrier policy statement says internal fences over 3 feet in height require building permits and inspections.
  • Peoria, Arizona, Fences not over 3 feet high are exempt; fences over 3 feet and up to 7 feet require a building permit demonstrating zoning and site drainage compliance, and walls over 7 feet also require structural calculations.

How to apply in Thurston County

Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.

What most fence permit applications include:

  • A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
  • That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
  • Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
  • The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
  • A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).

General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. Community Planning and Economic Development - Building Development Center sets the exact checklist for Thurston County.

Where to apply in Thurston County:

Community Planning and Economic Development - Building Development Center

Inspections and closing out your permit

Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.

  1. Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
  2. Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
  3. That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
  4. A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
  5. That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
  6. Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).

Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Thurston County permit portal or by phone at 360-786-5490.

Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.

Frequently asked questions

Do you need a fence permit in Thurston County?
Thurston County exempts fences 8 feet tall or shorter from a building permit. Fences taller than 8 feet require a permit from the Building Development Center. This county threshold is higher than the 7 foot baseline used in many jurisdictions. Fences 8 feet tall or shorter are exempt from a county building permit. Always confirm with the office before starting.
How much does a fence permit cost in Thurston County?
Building permit and plan review fees are valuation based; see the county 2026 Residential Building Fee Guide. See the official fee schedule for current amounts.
Where do you apply for a fence permit in Thurston County?
You can apply through the Thurston County permit portal or contact the Community Planning and Economic Development - Building Development Center directly. The links are listed on this page.

From the Library

What else needs a permit in Thurston County

Every other permit type we have verified for this jurisdiction, with the rule that applies here.

ProjectPermit needed?ThresholdTypical fee
Deck PermitIt dependsDecks are exempt if the surface is 30 inches or less from the ground to the top of the deck.Building permit and plan review fees are valuation based;
Electrical PermitPermit requiredElectrical work in unincorporated Thurston County requires a state electrical permit from L&I; the county itself does not issue electrical permits, with limited work exceptions under WAC 296-46B-901.L&I sets electrical permit fees;
HVAC PermitIt dependsHeating and cooling equipment and gas piping require a Minor Permit, but replacement of electric forced-air heating units and water heaters is exempt.Minor Permit fees apply;
Patio PermitIt dependsPatios and porches are exempt if 30 inches or less from the ground to the top of the surface.Building permit and plan review fees are valuation based;
Plumbing PermitPermit requiredNo permit is needed only to clear a blockage or to repair or stop a leak in a drain, water, soil, or vent pipe.Minor Permit fees apply;
Pool PermitIt dependsPools are exempt only if prefabricated, entirely above ground, less than 24 inches deep, and under 5,000 gallons capacity.Building permit and plan review fees are valuation based;
Roof Replacement PermitIt dependsRoof repair and replacement is exempt unless the work adds skylights or changes, repairs, or replaces structural elements or the roof pitch or slope.Building permit and plan review fees are valuation based;
Shed PermitIt dependsOne-story detached accessory buildings with no plumbing or electricity are exempt if under 200 square feet inside a county urban growth area or under 400 square feet outside a UGA.Building permit and plan review fees are valuation based;
Solar PermitIt dependsResidential rooftop solar PV systems need no county permit; ground-mounted and commercial systems require county permits, and every solar project needs a state L&I electrical permit.Building permit and plan review fees are valuation based;

Fence Permit in other Washington localities

Official sources

Verified by a person against the sources above on 2026-07-19, not confirmed with Community Planning and Economic Development - Building Development Center. Rules change; confirm before you build. How we verify.

Last checked: 2026-07-19Report an error on this page

Compare Fence Permit requirements across Washington localities