Nevada / Clark County

Fence Permit in Clark County, Nevada

By Mario Bailey Last checked 2026-06-18 · 2 official sources

Verified against official sources From an official source

It depends

Quick answer

All fences in Clark County require a Fence/Wall Permit (Form BPA-005) filed with the Department of Building and Fire Prevention. Fences over six feet in height additionally require a full building permit. Standard design drawings are available (B-114 wrought iron, B-115 chain link, B-100-1 masonry) to simplify the submission. Applications are submitted through the Citizen Access Portal.

Typical threshold: fences over 6 feet in height require a building permit; all fences require a Fence/Wall Permit (Form BPA-005) regardless of height.

6 ft
Threshold illustrated: 6 ft. Whether Clark County requires a permit above or below this measurement is stated in the verdict on this page, verified 2026-06-18.

Who is pulling this permit?

Hire it out

Before you sign, ask the contractor:

  • Who pulls the permit, you or me, and is the permit fee included in the bid?
  • Which inspections will this job need, and who meets the inspector on site?
  • Is your contractor license active in this locality, and under which business name?
Want a pro to handle this permit? Request free help

Tell us where your project stands. Free to ask; no obligation.

Where we have a vetted local pro who handles permits in Clark County, we connect you; otherwise we reply with the exact steps and office links for your situation. PermitNotebook is not a government agency and does not file permits. This is a free referral request; we may earn a fee if you hire a pro we introduce. Partners never influence our permit data. Privacy policy.

When a permit is usually needed

Before installing any fence or block wall

What fence permit costs in Clark County

Type A fencing 6 feet or under that is not a pool barrier needs no permit; a fence requiring one bills as a valuation-based building permit under Table 3-A starting at $54, per the county Building Administrative Code Ch. 22.02.

Official fee schedule

How to apply in Clark County

Most residential fences fall under the model code's 7-foot building-permit exemption, so the real approval step is a lightweight zoning or land-use permit built around a simple site plan showing the fence's location, height, and material, checked against setbacks and any corner-lot sight-triangle rule. A fence that will serve as a required swimming-pool barrier is the exception, since barrier fences carry life-safety requirements of their own.

What most fence permit applications include:

  • A fence 7 feet or under is exempt from the model code's building permit, the same threshold the IRC uses for other small projects (IRC 2021 R105.2).
  • That exemption only removes the building-code permit. It does not authorize skipping a jurisdiction's own zoning approval, which is why an exempt fence can still need its own land-use or zoning permit rather than a building permit (IRC 2021 R105.2).
  • Whatever your jurisdiction calls that approval, the application centers on a basic site plan: a drawing of the property showing the fence's location, height, and material, and how it relates to the property lines (common local zoning practice).
  • The same plan is checked against required setbacks and, on corner lots or near intersections, a sight-triangle rule that caps fence height so it does not block sightlines for drivers (common local zoning practice).
  • A fence that will serve as a required swimming-pool barrier is handled as life-safety work rather than the light zoning process, and at least one state's adopted residential code requires a building permit for barrier fences regardless of the general fence exemption (Oregon Residential Specialty Code 2021, R101.2.2).

General submittal guidance from International Residential Code (IRC), 2021 edition, Section R105.2. Source. Clark County Department of Building and Fire Prevention sets the exact checklist for Clark County.

Where to apply in Clark County:

Clark County Department of Building and Fire Prevention

Inspections and closing out your permit

Inspection follows the permit: a fence that never needed one gets no inspection at all under the model code, and a permitted fence typically gets a single final check rather than the staged inspections used for a house. The exception is a fence serving as a swimming-pool barrier, which gets its own dedicated barrier inspection covering height, gaps, and gate hardware.

  1. Inspection duty attaches only to work for which a permit is required, so a fence that qualified for the permit exemption carries no inspection obligation under the model code (IRC 2021 R109.1).
  2. Where a fence permit was issued, the process skips the staged foundation, frame, and rough-in inspections used for buildings and goes straight to one final inspection once the fence is finished (IRC 2021 R109.1.6).
  3. That single check is typically a zoning compliance inspection rather than a structural review, confirming the fence matches the approved height and site plan (common local practice).
  4. A fence built as a swimming-pool barrier breaks that light-touch pattern: it is separately inspected for barrier compliance, commonly required before the pool itself can be signed off (ISPSC 305; local pool-barrier inspection programs).
  5. That barrier inspection checks dimensional rules from the swimming pool and spa code rather than ordinary fence rules, including the minimum 48 inch barrier height and limits on openings and gaps a young child could pass through (ISPSC 305).
  6. Gate hardware is inspected too: a self-closing, self-latching gate is part of the barrier requirement, since an unlatched gate defeats the fence's purpose as a barrier (ISPSC 305).

Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Clark County permit portal or by phone at (702) 455-3000.

Inspection sequence from International Residential Code (IRC), 2021 edition, Section R109, and ISPSC 2021 Section 305 (barriers). Source. An open permit left un-inspected can surface later in a title search or home sale.

Permitting activity in Clark County

In 2024, Clark County authorized permits for 14,754 new residential housing units (12,277 single-family, 2,477 in multi-family buildings), valued at $3.7B, up from13,073 the year before. That works out to about 6.2 permits per 1,000 residents.

Source: U.S. Census Bureau, Building Permits Survey, 2024 annual data · population 2,398,871.

About Clark County

Clark County has about 935,960 housing units. The median home is valued at $400,800, against a median household income of $73,845. About 57% of homes are owner-occupied, and the typical home was built around 1997.

Source: U.S. Census Bureau, American Community Survey 2023 5-year.

Frequently asked questions

Do you need a fence permit in Clark County?
All fences in Clark County require a Fence/Wall Permit (Form BPA-005) filed with the Department of Building and Fire Prevention. Fences over six feet in height additionally require a full building permit. Standard design drawings are available (B-114 wrought iron, B-115 chain link, B-100-1 masonry) to simplify the submission. Applications are submitted through the Citizen Access Portal. Fences over 6 feet in height require a building permit; all fences require a Fence/Wall Permit (Form BPA-005) regardless of height. Always confirm with the office before starting.
How much does a fence permit cost in Clark County?
Type A fencing 6 feet or under that is not a pool barrier needs no permit; a fence requiring one bills as a valuation-based building permit under Table 3-A starting at $54, per the county Building Administrative Code Ch. 22.02. See the official fee schedule for current amounts.
Where do you apply for a fence permit in Clark County?
You can apply through the Clark County permit portal or contact the Clark County Department of Building and Fire Prevention directly. The links are listed on this page.

From the Library

What else needs a permit in Clark County

Every other permit type we have verified for this jurisdiction, with the rule that applies here.

ProjectPermit needed?ThresholdTypical fee
Deck PermitPermit requiredNot specifiedBilled as a valuation-based building permit under Table 3-A starting at $54 for the fir...
Electrical PermitPermit requiredNot specified$54 permit issuance fee under Table 3-B, with flat online simple permit fees of $61.88...
HVAC PermitPermit requiredNot specified$54 permit issuance fee under Table 3-C, with flat online simple permit fees of $61.88...
Patio PermitPermit requiredNot specifiedPatio covers bill as a valuation-based building permit under Table 3-A starting at $54...
Plumbing PermitPermit requiredNot specified$54 permit issuance fee under Table 3-D, with flat online simple permit fees of $56.57...
Pool PermitPermit requiredNot specifiedPool and spa permits add a flat $110 equipment and plumbing fee on top of the estimated...
Roof Replacement PermitPermit requiredNot specifiedReplacing no more than 64 sq ft of non-tile roof sheathing with no structural repairs n...
Shed PermitIt dependssheds over 200 sq ft require a building permit; storage sheds 200 sq ft or under may be exempt under Building Administrative Code Section 22.02.190A detached storage shed of 200 sq ft or less with no mechanical or plumbing needs no bu...
Solar PermitPermit requiredNot specifiedNo dedicated solar fee table;

Fence Permit in other Nevada localities

Official sources

Verified by a person against the sources above on 2026-06-18, not confirmed with Clark County Department of Building and Fire Prevention. Rules change; confirm before you build. How we verify.

Last checked: 2026-06-18Report an error on this page

Compare Fence Permit requirements across Nevada localities