California / Sacramento County
Deck Permit in Sacramento County, California
It depends
Sometimes, depending on the project
Before building a deck over 200 square feet, a deck more than 30 inches above grade at any point, a deck attached to the dwelling, or a deck serving a required exit door.
By Mario Bailey, verified against official sources
Quick answer
The division's own work-exempt handout carves out small ground-level decks, but all four conditions have to hold at once: 200 square feet or less, no more than 30 inches above grade at any point, not attached to a dwelling, and not serving the exit door the residential code requires. Cross any one of those and a permit is needed. The FAQ lists "Deck" among the projects that typically require a permit, with an asterisk pointing back to the code's exempt-work section.
Typical threshold: deck area, where the deck is also no more than 30 inches above grade at any point, is not attached to a dwelling, and does not serve a required exit door.
Who is pulling this permit?
Apply yourself
Hire it out
Before you sign, ask the contractor:
- Who pulls the permit, you or me, and is the permit fee included in the bid?
- Which inspections will this job need, and who meets the inspector on site?
- Is your contractor license active in this locality, and under which business name?
When a permit is usually needed
Before building a deck over 200 square feet, a deck more than 30 inches above grade at any point, a deck attached to the dwelling, or a deck serving a required exit door.
What a deck permit costs in Sacramento County
How Sacramento County compares in California
Across the California jurisdictions we have verified, the same threshold runs from 120 to 200, so a project that is exempt here may still need a permit one county over.
| Jurisdiction | Permit needed? | Threshold |
|---|---|---|
| Contra Costa County | It depends | area of a deck that is also no more than 30 inches above grade at any point, is not attached to a dwelling, and does not serve a code-required exit door |
| Riverside County | It depends | A deck is exempt only if it is 200 square feet or less in area, no more than 30 inches above grade at any point, not attached to a dwelling or townhouse, and does not serve the required exit door |
| Sacramento Countythis page | It depends | deck area, where the deck is also no more than 30 inches above grade at any point, is not attached to a dwelling, and does not serve a required exit door |
| San Bernardino County | It depends | floor area of a detached residential accessory structure |
| San Diego | It depends | deck over 200 sq ft or over 30 inches above grade or attached to a dwelling requires a permit |
| San Jose | It depends | deck over 200 sq ft or over 30 inches above grade or attached to dwelling or serving required exit requires a permit |
| Santa Clara County | It depends | deck area, paired with a 30-inch height limit, no attachment to the dwelling, and no required exit door served |
Closest deck permit thresholds outside California
Jurisdictions we cover whose limit sits nearest Sacramento County's 200 sq ft.
- Austin, Texas, uncovered decks with area no greater than 200 sq ft and no more than 30 inches above grade and not attached to the dwelling and not providing required egress and not in floodplain are exempt
- Baton Rouge, Louisiana, deck floor area; the exemption also requires the deck to be less than 30 inches off the ground and located in a buildable area of the lot
- Boston, Massachusetts, detached decks not more than 30 inches above grade and under 200 sq ft that do not serve an exit door may be exempt
- Corpus Christi, Texas, A deck needs a permit if it is larger than 200 square feet, or more than 30 inches above the ground, or attached to a dwelling, or serving the exit door; any one of the four triggers alone requires the permit.
How to apply in Sacramento County
A residential deck permit application is a set of construction documents that show what will be built and prove it meets the IRC deck provisions. In practice that means a scaled site plan locating the deck and its setbacks, plus deck plans and structural details covering the footings, posts, beams, joists, ledger, guards, and stairs.
What most deck permit applications include:
- A permit application identifying the work, the deck's size (square footage), and whether electrical work such as lights or receptacles is included, submitted for plan review before construction begins (IRC R106).
- A scaled site plan (for example 1/4 inch to 1 foot) showing the new deck's location relative to the house, its overall length and width, and dimensioned distances from the deck to all property lines and other structures so required setbacks can be verified (IRC R106.1.1).
- A deck plan drawn to scale showing overall dimensions and the framing layout: joist size, spacing, span, and species; beam size and span; post size and height; and footing or pier size and depth (IRC R507.4 posts, R507.5 beams, R507.6 joists, R507.3 footings).
- A section or side elevation with connection details showing the ledger attachment to the house band joist with flashing, the fastener or bolt schedule, joist hangers, post-to-beam and post-to-footing connections, and the required lateral load connection (IRC R507.9 ledger connection, R507.9.2 lateral connection, R507.2.4 flashing).
- Footing sizing derived from tributary area, the soil bearing value, and design loads per IRC Table R507.3.1, with footings shown bearing on undisturbed soil at the frost depth required by the jurisdiction (IRC R507.3).
- Details for the guards required where the walking surface is more than 30 inches above grade, and for the stairs and handrails, showing guard height and opening limits, stair riser and tread dimensions, and handrail location (IRC R312 guards, R311.7 stairs and handrails).
- For designs that fall outside the prescriptive R507 tables (for example multi-story or stacked decks, or a ledger attached to a cantilever), engineered and stamped structural plans are submitted in place of the prescriptive details (IRC R507.1 and R301).
General submittal guidance from IRC R106.1.1 (construction documents) and IRC R507 (exterior decks), 2021 IRC. Source. Sacramento County Community Development, Building Permits and Inspection Division sets the exact checklist for Sacramento County.
Where to apply in Sacramento County:
Sacramento County Community Development, Building Permits and Inspection Division
- Building Assistance Center, 9800 Goethe Road, Sacramento, CA 95827
- Phone: 916-875-5296
- Email: rudolphr@saccounty.gov
Inspections and closing out your permit
Deck work is inspected in sequence as it is built: the footings before concrete is placed, the framing before the decking boards go down, and a final inspection once the deck is complete. Each stage checks the items that would be hidden or unsafe if missed.
- Footing or pier inspection: after the holes are dug and any forms or reinforcing are set but before concrete is placed, the inspector checks footing depth and diameter, a flat undisturbed bearing surface, and that the holes are free of water (IRC R109.1.1 foundation inspection; R507.3 footings).
- Framing inspection: after the deck is framed but before the decking conceals it, the inspector verifies the ledger attachment and its flashing, the fastener and bolt schedule, joist hangers and metal connectors, post-to-beam and post-to-footing connections, and the lateral load connection; call it before decking is installed (IRC R109.1.4 frame inspection; R507.9 ledger and flashing).
- Final inspection: after the deck is complete and before it is used, the inspector confirms guard height and opening limits (a 4 inch sphere must not pass, 4 3/8 inch at stairs), stair riser and tread dimensions, handrail height and graspability where there are 4 or more risers, stair landings, and required stair lighting (IRC R109.1.6 final inspection; R312 guards, R311.7 stairs and handrails).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Sacramento County permit portal or by phone at 916-875-5296.
Inspection sequence from IRC R109 (inspections: R109.1.1 footing before concrete, R109.1.4 frame, R109.1.6 final), 2021 IRC. Source. An open permit left un-inspected can surface later in a title search or home sale.
Your Deck Permit checklist for Sacramento County
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: deck area, where the deck is also no more than 30 inches above grade at any point, is not attached to a dwelling, and does not serve a required exit door. Usually needed: Before building a deck over 200 square feet, a deck more than 30 inches above grade at any point, a deck attached to the dwelling, or a deck serving a required exit door.
- Budget the fee. No deck line item is published. Sacramento County posts no building permit fee schedule PDF; its Fees and Exactions page links "Permit Fees" to Sacramento County Code Chapter 16.90, Construction Permit Fees, on ecode360, which returns HTTP 403 to automated requests, so no dollar figures were transcribed. Fees are calculated and paid in the Accela Citizen Access portal at application, plus the Technology (IT) Cost Recovery Fee under County Code Section 16.140.010. Official fee schedule.
- Apply. A residential deck permit application is a set of construction documents that show what will be built and prove it meets the IRC deck provisions. In practice that means a scaled site plan locating the deck and its setbacks, plus deck plans and structural details covering the footings, posts, beams, joists, ledger, guards, and stairs. Start at the Sacramento County permit portal.
- Keep the office details handy. Sacramento County Community Development, Building Permits and Inspection Division. Phone: 916-875-5296. Address: Building Assistance Center, 9800 Goethe Road, Sacramento, CA 95827.
- Plan for inspections. Deck work is inspected in sequence as it is built: the footings before concrete is placed, the framing before the decking boards go down, and a final inspection once the deck is complete. Each stage checks the items that would be hidden or unsafe if missed.
Compiled from the official sources on this page. Last checked .
Frequently asked questions
- Do you need a deck permit in Sacramento County?
- The division's own work-exempt handout carves out small ground-level decks, but all four conditions have to hold at once: 200 square feet or less, no more than 30 inches above grade at any point, not attached to a dwelling, and not serving the exit door the residential code requires. Cross any one of those and a permit is needed. The FAQ lists "Deck" among the projects that typically require a permit, with an asterisk pointing back to the code's exempt-work section. Deck area, where the deck is also no more than 30 inches above grade at any point, is not attached to a dwelling, and does not serve a required exit door. Always confirm with the office before starting.
- How much does a deck permit cost in Sacramento County?
- No deck line item is published. Sacramento County posts no building permit fee schedule PDF; its Fees and Exactions page links "Permit Fees" to Sacramento County Code Chapter 16.90, Construction Permit Fees, on ecode360, which returns HTTP 403 to automated requests, so no dollar figures were transcribed. Fees are calculated and paid in the Accela Citizen Access portal at application, plus the Technology (IT) Cost Recovery Fee under County Code Section 16.140.010. See the official fee schedule for current amounts.
- Where do you apply for a deck permit in Sacramento County?
- You can apply through the Sacramento County permit portal or contact the Sacramento County Community Development, Building Permits and Inspection Division directly. The links are listed on this page.
- Can a homeowner pull a deck permit themselves in Sacramento County?
- Under California law (Business & Professions Code 7044(a)-(b); Business & Professions Code 7031.5): California exempts an owner-builder from contractor licensing when the owner personally performs the work, or uses only wage employees, on their own property and does not intend the improvements for sale. A homeowner may also directly hire licensed trade contractors for up to four single-family residences a year, or improve their own principal residence without a general contractor's license, as long as they have actually lived there for the 12 months before the work is finished. Selling a self-built structure within one year of completion creates a rebuttable presumption that it was built for sale, which defeats the exemption, and selling five or more structures within a year makes that presumption conclusive. Separately, every city or county that requires a building permit must also require the applicant to file a signed statement giving their contractor license number or the basis of their claimed exemption; a false or missing statement carries a $500 civil penalty. Confirm how Sacramento County applies this before you apply.
From the Library
What else needs a permit in Sacramento County
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Electrical Permit | Permit required | Not specified | No electrical line item is published. |
| Fence Permit | It depends | fence height, measured from the grade on the right-of-way side when the fence sits within 5 feet of the public right-of-way and otherwise from the highest grade on either side | No fence line item is published. |
| HVAC Permit | Permit required | Not specified | No heating and cooling line item is published. |
| Patio Permit | It depends | floor area of a detached, not fully enclosed patio cover, pergola, arbor or trellis that is also no taller than 12 feet and stands 5 feet or more from the property line | No patio cover line item is published. |
| Plumbing Permit | Permit required | Not specified | No plumbing line item is published. |
| Pool Permit | It depends | depth of water the structure holds; the permit exemption is limited to prefabricated pools | No pool line item is published. |
| Roof Replacement Permit | Permit required | Not specified | No re-roof line item is published on the current site. |
| Shed Permit | It depends | floor area of a one-story detached structure designed for storage with no electrical or plumbing installed | No shed line item is published. |
| Solar Permit | Permit required | Not specified | The county publishes no dollar amount for a residential solar permit, but the SolarAPP+... |
Deck Permit in other California localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Sacramento County documents; the office above sets the local rules.
Verified by a person against the sources above on , not confirmed with Sacramento County Community Development, Building Permits and Inspection Division. Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Compare Deck Permit requirements across California localities
Permit office
Sacramento County Community Development, Building Permits and Inspection Division
916-875-5296Permit portal