Fence Permit in Billings, Montana
It depends
Sometimes, depending on the project
Before erecting a fence over 36 inches high; a fence over 6 feet also needs a building permit.
Quick answer
Authority: the City of Billings Building Division issues building, electrical, plumbing (including gas) and mechanical permits inside the Billings city limits only; Montana's Building Codes Program lists Billings as a certified local government for codes 'B, P(M/G) E, M, SP' with jurisdiction 'City Limits'. Outside the city limits the city has issued no building, plumbing, mechanical or electrical permits since October 1, 2003, and the State of Montana Building Codes Bureau has jurisdiction (unincorporated Yellowstone County, Laurel, which runs its own building-only program, and other towns are out of scope). Under Billings's Unified Zoning Code (Sec. 27-1209), every fence over 36 inches high needs a fence permit from the Planning Division, applied for through CityView ('Apply for a Sign or Fence Permit'). A fence over 6 feet must also meet the structure setbacks of its zone and requires a building permit (Sec. 27-1209.C.2(b)); the Building Division says fences it permits must be designed for a 105 mph wind load and submitted with a site plan. Fences within a required front yard setback are capped at 4 feet.
- Typical threshold
- Fence height measured from the top rail, board or wire to the ground inside the fence; Planning Division fence permit above 36 inches, and a building permit as well above 6 feet
- Issued by
- City of Billings Building Division
- Phone
- (406) 657-8270
Who is pulling this permit?
Apply yourself
Hire it out
Sponsored
Fence installers usually handle any required permit as part of the job. Compare a few bids before you commit.
Compare fence installer quotes on Angi
Sponsored link. PermitNotebook may earn a fee if you request quotes through it. Partners never influence our permit data.
What a fence permit costs in Billings
- Fee schedule in force
- Official scheduleRead .
Planning Division fence permit: the City and County fence permit application says 'Fee: Call 406-657-8247 for current fee'. No fence fee is printed on a published schedule.
Fees are the jurisdiction’s; we do not mark them up or estimate them.
How to apply in Billings
General guide, not specific to this office
What a fence permit application usually includes, and which inspections usually follow, is much the same from place to place, so we explain it once: how a fence permit works, from application to final inspection. That guide describes common practice under the model codes. The office on this page sets the actual checklist.
City of Billings Building Division
- 316 N 26th St, 5th Floor, Billings, MT 59101
- Phone: (406) 657-8270
- Email: permits@billingsmt.gov
Your Fence Permit checklist for Billings
- Confirm the requirement. Sometimes, depending on the project. Typical threshold: Fence height measured from the top rail, board or wire to the ground inside the fence; Planning Division fence permit above 36 inches, and a building permit as well above 6 feet. Read the rule where we read it: billingsmt.gov: Building.
- Budget the fee. Price your project from the official fee schedule, which we read on .
- Apply. Start at the Billings permit portal.
- Keep the office details handy. City of Billings Building Division. Phone: (406) 657-8270. Email: permits@billingsmt.gov. Address: 316 N 26th St, 5th Floor, Billings, MT 59101.
Compiled from the official sources on this page. Last checked .
What else needs a permit in Billings
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Bathroom Remodel Permit | It depends | Finish work versus construction, plumbing or electrical changes | Building permit fees are set by valuation (Permit Fees by Valuation schedule, PDF dated April 23, 2026): $30.00 for $1 to $1,000 |
| Deck Permit | Permit required | Any size | Building permit fees are set by valuation (Permit Fees by Valuation schedule, PDF dated April 23, 2026): $30.00 for $1 to $1,000 |
| Electrical Permit | Permit required | Any size | See schedule |
| EV Charger Permit | Permit required | Any size | Billings's residential electrical fees are flat items (for example, interior rewire only or new addition to home $40.00); the schedule has the rest |
| HVAC Permit | Permit required | Any size | Mechanical Permit Fees (April 23, 2026): $15.00 for the issuance of each permit (minimum total on each permit); the schedule has the rest |
| Plumbing Permit | Permit required | Any size | See schedule |
| Roof Replacement Permit | Permit required | Any size | Building permit fees are set by valuation (Permit Fees by Valuation schedule, PDF dated April 23, 2026): $30.00 for $1 to $1,000 |
| Shed Permit | It depends | Floor area of a detached shed | Above the exemption a shed takes a building permit priced by valuation |
| Solar Permit | Permit required | Any size | See schedule |
| Water Heater Permit | Permit required | Any size | Plumbing Permit Fees (PDF dated April 23, 2026, read from the image): $20.00 issuance minimum per permit plus $7.00 'For each water heater and/or vent' |
Frequently asked questions
- Do you need a fence permit in Billings?
- It depends on the project. Fence height measured from the top rail, board or wire to the ground inside the fence; Planning Division fence permit above 36 inches, and a building permit as well above 6 feet. If you are unsure how that applies to your project, call the City of Billings Building Division at (406) 657-8270 before you start.
- How much does a fence permit cost in Billings?
- The fee wording from the official schedule is in the cost table on this page, as we read it on 8 Nov 2026. For the figure on your own project, call the City of Billings Building Division at (406) 657-8270.
- Where do you apply for a fence permit in Billings?
- You can apply through the Billings permit portal or contact the City of Billings Building Division directly. The links are listed on this page.
- Can a homeowner pull a fence permit themselves in Billings?
- Under Montana law (MCA 37-45-104(13); 37-68-103(3); 37-69-102(1)(a); 50-60-506(4)): Montana's construction contractor license law does not apply to an owner working on the owner's own property, occupied or not, unless the owner builds to promptly sell, and even then the exemption holds if the owner has lived there as a primary residence for at least the last 12 months (MCA 37-45-104(13)). An individual needs no electrician's license to do electrical work on the individual's own property or residence kept for the individual's own use, except work on a grid-tied generator (MCA 37-68-103(3)); the state issues a homeowner electrical permit for this, with state inspections. An owner of a single-family residence used only for the owner's personal use may install all sanitary plumbing and potable water piping without a plumbing license (MCA 37-69-102(1)(a)) and, where the state has jurisdiction, without a state plumbing permit (MCA 50-60-506(4)). Certified local jurisdictions may still require their own building permits. Confirm how Billings applies this before you apply.
From the Library
Everything above, sourced
How this fence permit page for Billings was verified. 2 official sources: billingsmt.gov, library.municode.com; fee schedule: official document. Last checked by Mario Bailey, not confirmed with City of Billings Building Division. Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page