PermitNotebook / Guides

Guide

Do You Need a Permit for a French Drain, Sump Pump or Driveway Culvert?

A French drain on your own land can need no building permit (Pasco County exempts one not tied to the public sewer). A new sump is a plumbing permit item in Henrico County, a plug-in pump needs none in Burlington, and where it discharges has a rule of its own. A culvert under a driveway needs the road owner's permit and pipe size.

These are three drainage jobs with three different gatekeepers. A French drain that collects water on your own lot and lets it out on your own lot can need no building permit at all: Pasco County, Florida, lists “French Drains (Cannot be tied into Public Sewer)” as exempt. A sump pump is plumbing, and offices split on whether a new one needs a permit, and the most specific rule we found is about where the pump sends the water: Burlington, Vermont, says it must stay on your property and “shall not connect to the public sewer.” A culvert under a driveway sits in the road’s ditch, so the road owner (a county, township or state highway office) issues the permit and decides the pipe.

French drain on your lot
Exempt in Pasco County, FLif not tied into the public sewer
New sump pump
Plumbing permit in Henrico County, VA9 offices in our dataset name sumps
Plug-in sump, existing outlet
No permit in Burlington, VT
Sump discharge
Not to the public sewerBurlington; ask your sewer utility
Driveway culvert
Road owner's permitfour county rules start at 15 in.

Find out who owns the road in front of your house and where your sump discharges now. Then ask your building office: “I plan to [install a French drain along the side yard / add a sump pump in the basement] at [address]. The water will discharge to [a dry well / the yard / the street]. Do I need a plumbing or building permit, and is that discharge point allowed?” For a culvert, ask the road office: “I need a culvert under my driveway at [address]. Who sets the pipe size, and do you inspect before I cover it?”

French drains: where the water goes is the issue

A gravel trench with a perforated pipe is site work, and the one exemption we found treats it that way: Pasco County’s list, revised September 24, 2026, lists French drains right after “Non-Structural Residential Landscape elements,” on one condition, that the drain “Cannot be tied into Public Sewer.” That condition is what matters. A French drain that ends at the curb, in a neighbor’s yard or in a storm sewer is sending water onto someone else’s system, which is where a grading, stormwater or right-of-way rule can apply even when the trench itself is exempt. Our guide to grading, fill dirt and landscaping permits covers the soil-disturbance side.

Before you dig any trench, call 811, the national call-before-you-dig number, so buried utility lines are marked.

Sump pumps: installing one, replacing one, and the outlet

Nine offices’ confirmed rules in our dataset mention sump pumps. Six of those mentions are fee lines, which tell you a sump is a priced plumbing item: Sterling Heights’ 2026-2027 application lists “Sump or Interceptor” at $25.00 plus the $55.00 application fee; Cook County, DeKalb County, Ann Arbor, Detroit and Eugene price sumps on their plumbing schedules too, as recorded in our dataset. Two rules say when the permit applies:

  • Henrico County, Virginia: “Permits are required for the initial installation of fixtures and appliances permanently connected to the electrical, mechanical, gas and/or plumbing system(s),” and its list includes “Sump pumps.” A replacement in the same pit is a different case from a first install.
  • Burlington, Vermont: “Placing a sump pump into an area where an approved outlet is within reach to plug it in no plumbing permits are required.” If there is no outlet within reach of the cord, “then one needs to be installed with permits and approved devices for wet locations.”

Lincoln, Nebraska, as verified in our dataset, lists replacing a sump pump among plumbing repairs that need no permit.

Where the water may go

The discharge is where a sump stops being a private matter. Burlington: “Sump pumps need to discharge to the exterior and remain on your own property. They shall not connect to the public sewer, nor discharge on neighboring property or discharge in the City Right of Way.” Sterling Heights, by contrast, prices a “Sump Connection to Storm Sewer” at $57.00, so there a storm sewer connection is permitted work. Ask your sewer utility which connection, if any, it allows. A hose run to the street gutter may still be “the City Right of Way” in Burlington’s terms; ask before you pipe to the curb.

If the sump is part of a larger basement waterproofing job, see our guide to foundation repair and crawl space permits.

Driveway culverts: the road owner decides

A culvert lets a roadside ditch flow under your driveway, so it is built in the road’s right of way and permitted by whoever maintains the road. All four county rules we read start at 15 inches, with exceptions: Boone allows 12 inch metal pipe in some situations, Cass accepts 14 inch steel, and Delta allows smaller pipe “unless otherwise permitted”; only Champaign says “at no time” smaller. They differ more on the rest:

CountyMinimum pipeLengthWho decides and who pays
Boone County, Missouri15 in. (12 in. corrugated metal only in some situations)24 ft minimum; one size larger past 30 ftPublic Works “shall determine pipe diameter size, final location”; the permit holder buys and installs; “Costs of new culvert installations shall be borne entirely by the property owner”
Cass County, Missouri (2024)15 in. corrugated metal or dual-wall plastic; 14 in. steel30 to 60 ft”an initial site inspection done by Cass County to determine culvert size”; install within 30 days of the permit; “A Required Permit fee of $100.00”; inspection “prior to covering”
Champaign County, IllinoisMetal pipe, “at no time … less than 15 inches in diameter”the request form’s “Minimum culvert size shall be 15”x 30‘“laid “to the flow line grade of the existing ditch”
Delta County, Michigan (Nov. 2023)“No culvert of less than a 15-inch diameter may be installed, unless otherwise permitted”; size set by the road commissionset by the road commissionpermits for a new access, for “extending a culvert,” and for “Culvert replacement”; maintenance “is the responsibility of the property owner”; $30.00 residential fee

Two points from these rules are easy to miss. Replacing a rusted-out culvert needs a permit too in Delta County, and the owner, not the county, maintains it. And Boone County inspects “within five (5) business days of notification of completion,” so leave the pipe visible until it does. On a state highway, the state transportation department is the road owner to ask; our guide to driveway permits covers road ownership.

A culvert where a stream crosses your property, rather than a roadside ditch, is a different matter that can involve state water agencies; we have not covered those rules here.

Method

Pasco County’s exemption list, Burlington’s plumbing page, Henrico County’s permit page, Sterling Heights’ plumbing application and the four county culvert documents were read on November 18, 2026. The nine sump offices are those whose confirmed rules in our dataset mention a sump or sump pump (Fort Wayne’s roof sumps, a storm drain item, left out); Cook County, DeKalb County, Ann Arbor, Detroit, Eugene and Lincoln are cited from their verified rows, with each office’s read date on its page here. We did not survey sanitary sewer utilities’ clear-water rules beyond Burlington’s.

Do You Need a Permit for a French Drain, Sump Pump or Driveway Culvert?: figures as of 28 Sep 2026, 137 jurisdictions. Now 178.

Sources

Get rule-change alerts

We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.

We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.