Guide
Can You Draw Your Own Plans for a Building Permit?
For a single-family house project, five of the six state architect licensing laws we read let a person who is not an architect prepare the plans, and New York sets a size and cost limit. Where the seal comes back anyway: framing outside the standard tables, tall decks, structural repairs. Standard plans that skip the designer, and what any plan set must show.
For a single-family home, the state law usually lets you: five of the six state architect licensing laws we read today let a person without a license prepare the plans, some with limits on size or height, so the owner can be the one who draws them. New York is the exception, with a 1,500 square foot size limit and a cost limit on alterations. The license question is only half the answer, though. The building office still decides whether your drawings are good enough to review, and some work needs a licensed seal no matter who draws the rest: framing outside the standard tables under California’s law, and in some offices a tall deck (Pittsburgh) or a structural porch repair (Chicago).
- California
- Single-family woodframe, two stories and basementB&P 5537, 6737.1
- Arizona
- Detached single-family dwellingA.R.S. 32-144(A)(3)
- Texas
- Single-family or dual-family dwellingOccupations Code 1051.606(a)(4)
- Florida
- One- or two-family residence, regardless of costF.S. 481.229(1)(b)
- Virginia
- Homes up to three stories, not electrical or mechanicalCode 54.1-402(A)(1)
- New York
- Only up to 1,500 sq ft, or small alterationsEducation Law 7307(5)
Before you draw anything, ask your building office two questions in writing: “For a [project] at my single-family home, may I submit plans I prepare myself, and which parts, if any, must be stamped by a licensed architect or engineer? Do you have a standard plan or a plan checklist for this project?” The second answer can save you the whole design fee.
What the state laws say
The six statutes read today, in their own words:
- California: the architects’ law “does not prohibit any person from preparing plans, drawings, or specifications for” “Single-family dwellings of woodframe construction not more than two stories and basement in height,” and garages or other structures appurtenant to them. The engineering law, section 6737.1, has the same list.
- Arizona: the licensing chapter may be practiced without registration by “A nonregistrant who designs, alters or adds to” “A detached single-family dwelling.”
- Texas: the architects’ law does not apply to a person who does not claim to be an architect and who prepares the plans for “a single-family or dual-family dwelling or a building or appurtenance associated with the dwelling.”
- Florida: “No person shall be required to qualify as an architect in order to make plans and specifications for” “Any one-family or two-family residence building, townhouse, or domestic outbuilding appurtenant to any one-family or two-family residence, regardless of cost.”
- Virginia: no architect’s or engineer’s license is needed to prepare plans for “Single- and two-family homes, townhouses, and multifamily dwellings, excluding electrical and mechanical systems, not exceeding three stories,” provided the plans “bear the name and address of the author and his occupation.”
- New York: the architecture article does not apply to “residence buildings of gross area of fifteen hundred square feet or less, not including garages, carports, porches, cellars, or uninhabitable basements or attics,” or to “Alterations, costing ten thousand dollars or less, to any building or structure within the city of New York and twenty thousand dollars or less, to any building or structure outside the city of New York which do not involve changes affecting the structural safety or public safety thereof.”
So the owner of a single-family house in Phoenix, Fort Worth or Tampa may, under the state’s architect licensing law, draw the plans for an addition, and in Richmond may draw all but the electrical and mechanical systems. In Buffalo, the same project falls outside New York’s exemption if the house is over 1,500 square feet and the work costs more than $20,000 or touches structure, so a licensed professional prepares it. We have not read the other states’ laws; check yours with the state board that licenses architects.
Where the seal comes back
The exemptions protect who may draw, not what may be built without engineering. California’s says so in the same section: if any portion of an exempt house “deviates from substantial compliance with conventional framing requirements,” the building official “shall require the preparation of plans, drawings, specifications, or calculations for that portion by, or under the responsible control of, a licensed architect or registered engineer.” A beam sized by calculation instead of a code table is the kind of portion that section is about.
Offices set their own triggers, and our dataset shows how specific they get. 75 verified rows mention a design professional or sealed plans for some version of the job: 32 of them solar, 15 pools, 10 decks, 6 sheds, 5 fences and 7 in other project types. A few of the lines they draw, in their rules as verified in our dataset:
| Office | Work that needs a licensed professional’s plans |
|---|---|
| Pittsburgh | Decks over 8 feet high (30 inches to 8 feet can follow the DCA6 deck guide) |
| Baltimore County, MD | Decks above 3,000 sq ft (construction plans of any author from 600 sq ft) |
| Town of Hempstead, NY | Second-story decks |
| Jacksonville | Sheds of 150 sq ft or more, or $5,000 or more |
| Orange County, FL | Sheds over 120 sq ft |
| Corpus Christi | Fences over 7 feet |
| Tulsa | Precast or masonry fences over 4 feet |
| Pasco County, FL | A slab intended for a future structure |
Chicago, read today, adds one that matters in older cities: repairing or replacing structural parts of a porch, “such as columns, beams, foundations, stringers, or floor joists,” always needs a permit, and “you must submit plans prepared by an Illinois-licensed architect or structural engineer.”
Standard plans: drawings someone else already engineered
The cheapest plan is the one the office already approved. Orange County, California, which issues permits for its unincorporated areas, says a patio cover permit “may be obtained using this O.C. standard drawing. Simply provide plot plan and fill in the blanks and information requested on these plans.” From our dataset’s verified rows, Lee County, Florida, accepts county master shed plans, Riverside County, California, has a county standard deck plan, and Pittsburgh’s prescriptive path runs through the American Wood Council’s DCA6 deck guide. A manufacturer’s engineered drawings for a kit shed, carport or aluminum patio cover can play the same role: Riverside County issues Alumawood patio cover permits against the maker’s pre-engineered drawings, according to its row in our dataset. Ask whether yours accepts them.
What any plan set has to show
Who draws it matters less than what is on it. These items come up in the plan requirements we read:
- A site or plot plan: the lot lines, the existing buildings, the new work, and the distance from it to each property line. Orange County’s standard drawing asks you to show the cover’s “size, area and distance to property lines,” the posts, nearby pools, retaining walls and steep slopes.
- A floor plan with room uses and dimensions, and the doors and windows.
- Framing and foundation details: sizes, spans, spacing, connectors, footing size and depth.
- Elevations where height, a roof or a stair is involved.
- Drainage, when you add hard surface; Cook County, Illinois, asks for arrows showing the pitch of new flatwork.
Draw to scale, put your name and address on every sheet (Virginia’s exemption requires the author’s name, address and occupation), and keep the stamped set on site for the inspector.
If you hire a drafter
A drafter or designer who is not licensed can draw plans wherever the state exemption allows it, but cannot seal the parts that need a seal. Texas’s exemption is limited to a person who does not represent themselves as an architect. If a designer’s quote includes “structural calcs,” ask who signs them and whether that person holds a license in your state; Chicago, for one, names Illinois-licensed professionals specifically.
For the permits themselves, our guides to who pulls the permit and home addition permits pick up from here, and our guide to permit expediters covers paying someone to file and track the application.
Method
The seven statutes and the Chicago, Cook County and Orange County pages were read on November 18, 2026, and supply every quote (Orange County’s drawing is a scanned PDF, read from the page images). The dataset count is our verified rows (confirmed or reported) whose rule summary, when-needed or threshold text mentions sealed or stamped plans, a licensed or registered architect, engineer or design professional, or a structural engineer; it counts mentions, including rules that say no seal is needed below a line. Pittsburgh, Baltimore County, Hempstead, Jacksonville, Orange County (Florida), Corpus Christi, Tulsa, Pasco County, Lee County and Riverside County are cited from their rules as verified in our dataset. We read six states’ architect laws and California’s engineering law, not every state’s.
Can You Draw Your Own Plans for a Building Permit?: figures as of 28 Sep 2026, 137 jurisdictions. Now 178.
Sources
- California Business and Professions Code 5537: plans for single-family woodframe dwellings, and the licensed-professional requirement for nonconventional portions. (accessed )
- California Business and Professions Code 6737.1: the same exemption from the engineering law. (accessed )
- Texas Occupations Code 1051.606: persons not represented as architects, including plans for single-family or dual-family dwellings. (accessed )
- Florida Statutes 481.229: exceptions from architect licensure for one-family or two-family residence buildings. (accessed )
- Code of Virginia 54.1-402: plans for single- and two-family homes not exceeding three stories, excluding electrical and mechanical systems. (accessed )
- Arizona Revised Statutes 32-144: a nonregistrant who designs, alters or adds to a detached single-family dwelling. (accessed )
- New York Education Law 7307(5): residence buildings of 1,500 square feet or less, and the alteration cost limits. (accessed )
- City of Chicago Department of Buildings, Porch and Deck Safety: structural porch repairs need plans by an Illinois-licensed architect or structural engineer. (accessed )
- Cook County, Illinois, Flat Work Permit Requirements: drawings with pitch and drainage arrows. (accessed )
- OC Public Works, Typical Roofed Patio Cover standard drawing: a permit from a filled-in standard plan and plot plan. (accessed )
Get rule-change alerts
We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.
We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.