PermitNotebook / Guides

Guide

Do You Need a Permit to Upgrade an Electrical Panel?

Yes. A panel replacement or service upgrade is permitted work in every office in our dataset whose electrical rule mentions it, and the power company will not reconnect until the inspector signs off. What a 200 amp upgrade permit costs in six offices read today, the outdoor emergency disconnect rule, and where homeowners are allowed to do it.

Plan on a permit. Replacing a panel, changing a fuse box to breakers or raising a house from 100 to 200 amps is permitted electrical work: in 106 offices whose verified electrical rule in our dataset mentions panel or service work, none exempts a service change or upgrade, and only two leave a narrow door open for a like-for-like part. The permit is also what gets your power back on: the utility disconnects the meter for the swap and, in the utility pages we read, reconnects only after the local inspector approves the work.

Panel or service change
Permit required106 offices whose rule mentions it
Who restores power
The utility, after the inspection passes
200 amp permit, six offices
$50 to $237.44Maricopa County, AZ to Portland, OR, read November 18, 2026
Outdoor emergency disconnect
Can be required on an upgradeNEC 230.85; Saint Paul and Philadelphia apply it differently
Homeowner doing it
Allowed in some offices, barred for service work in others

Ask the electrician who will quote the job: “Will you pull the electrical permit, schedule the inspection and coordinate the disconnect and reconnect with the utility? Does your price include anything the inspector will require on this upgrade, such as an outdoor emergency disconnect, surge protection or new grounding?” The second question is where quotes for the same panel differ.

Why there is no small-panel exemption

The 2024 International Residential Code exempts five kinds of electrical work, and the closest any comes to a panel is “Replacement of branch circuit overcurrent devices of the required capacity in the same location”: swapping a breaker for the same size, not the panel it sits in. Offices say it directly. Portland, Oregon, lists “Replacing a service panel” among work that needs a permit, and asks for the panel’s amperage when you are “upgrading service or changing a fuse box to breakers.” In our dataset, Las Vegas requires a permit to change, upgrade or relocate the main panel, Greensboro, North Carolina, exempts swapping a receptacle or switch but not a service change or a panel change, and Clark County, Nevada, issues same-size panel replacements as simple online permits rather than skipping them.

The two narrow doors: Tucson says a main breaker replacement may be exempt under its Policy 2016-01, and Fairfax County lists like-for-like direct replacement of electrical work in the same location as not needing a permit while also requiring one to replace electrical equipment, which leaves a same-size panel swap unclear on its own pages. Ask either office before relying on it.

Some offices make the routine version fast. Los Angeles County’s Express Electrical Permit covers main panel upgrades that need no plan check, and San Diego County lets a residential service upgrade on an existing panel up to 400 amps be applied for online (both from our dataset).

The utility will not reconnect without the inspection

In the utility sequences we read, a panel swap means the meter is pulled and the house is dark until the new equipment is inspected. The utility pages we read describe the same order:

  • SDG&E (San Diego): when the meter panel stays where it is, “You will need to schedule your service to be disconnected and reconnected on the same day,” and “The city/county will inspect the installation of the meter panel and notify SDG&E of completion by 2:00 p.m. on the same day to restore electrical service.”
  • Georgia Power: “Wiring approvals are a result of an electrical inspection done by the city or county in which your home or business is located.” Asked whether the electrician or the utility can provide one instead, its answer is “No.”
  • PSE&G (New Jersey): the utility needs a certificate of approval before it connects service, which for electric service it calls a “cut-in card,” and for an upgrade to 200 amps or less you pick up a meter pan by presenting “the original of your city permit.”

Plan the day around that sequence: disconnect in the morning, the work, the inspection, then the reconnect. An inspection that fails or slips can mean a night without power, which is why SDG&E’s sheet has the inspection booked for the same day as the disconnect.

If your house has been without power for months, a different permit applies. Portland issues a service reconnect permit “ONLY for when the power has been off, and the power company requires an inspection to turn it back on,” for power off six months or more. Detroit’s overview of the same permit says the city inspector sends a “Service Release approval to DTE Energy” once the inspection passes, and that new work found on the service equipment voids the reconnect permit.

What a 200 amp upgrade permit costs

The fees below are each office’s own line for a residential service or panel upgrade of 200 amps, read on November 18, 2026 from the schedule each office posts, dated as shown. They are permit fees only, before any plan review, and they do not include the electrician’s price.

OfficeLine on the schedule (schedule date)200 amp upgrade
Maricopa County, AZElec. Serv Residential 1 to 200 amps (June 2024 summary)$50
Boston, MA$20.00 application fee plus $.25 per amp (posted May 15, 2023)$70 (our arithmetic)
Worcester, MAService Upgrade, repairs, grounding, first meter (effective March 1, 2024)$85.00
San Diego, CAPanel Replace/Upgrade up to 200 amp (May 2026)$176.57
Aurora, COResidential Electrical Service Upgrade (2026 flat-rate list)$190, plus city use tax on materials
Portland, ORServices or Feeders, 200 amps, plus 12% state surcharge (July 10, 2026)$237.44 (our arithmetic)

Aurora’s sheet notes that its flat fees have “no effect on the calculation and collection of city use taxes,” which are collected on building materials separately.

The spread is almost five to one for the same job, and the method differs as much as the number: a flat line, a per-amp rate, a per-panel charge. Boston’s per-amp formula prices a 400 amp service at $120 there; Aurora’s flat rate does not change with size. Our guide to why permit costs vary explains the pricing methods behind gaps like this.

The emergency disconnect: same rule, two readings

Since the 2020 National Electrical Code, section 230.85 has required, in Philadelphia’s summary, that “one- and two-family dwelling units shall have an emergency disconnect installed in a readily accessible outdoor location.” On an existing house, the question is when an upgrade triggers it, and two cities read the trigger differently.

Philadelphia, citing the 2020 NEC, says the requirement “is triggered by all new service installations and existing service upgrades,” for example “replacing a 100-amp service with a 200-amp service,” and that it “does not apply to rowhouses or townhomes” up to three stories, an exemption it carries in its own code. Saint Paul’s handout, written under the 2023 NEC, goes further: it says a “routine electrical panel replacement of the same amperage (e.g. fuses to circuit breakers)” now has to meet “the new 2023 NEC 230.85(C) code requirement,” which “would now require an exterior emergency disconnect to be installed.” The same handout lists the other items its inspectors check on an upgrade: service grounding and bonding, panelboard clearances, overhead conductor clearances, strapping, breaker ties for multi-wire circuits and “a completed circuit directory clearly identifying the use of each circuit.”

Saint Paul now enforces the 2026 NEC on permits obtained on or after August 17, 2026, so ask the city whether the handout still states its practice. Which edition your office enforces, and how it reads the trigger, can add an outdoor disconnect to the job. Ask before you compare quotes.

Can a homeowner do it?

Some offices let an owner who lives in the house do their own electrical work, panel included. Portland, Oregon, allows it “only if they own and live in the home,” with the owner on record as a person, not an LLC. Others let homeowners wire circuits but stop at the service, in their rules as verified in our dataset: Omaha lets only licensed electricians repair or replace services, panelboards or feeders; Lincoln, Nebraska, lets owner-occupants install branch circuits and feeders but not service equipment; St. Louis’s homeowner permit does not cover service changes; Des Moines requires service upgrades and panel change-outs to be done by state-licensed electrical contractors. Our guide to whether a homeowner can pull an electrical permit covers the state laws behind those rules.

Even where it is legal, the meter side is not yours to touch: pulling a meter is the utility’s job, and the inspection comes before the reconnect.

If the upgrade is for a heat pump, an EV charger or solar

A bigger service is often the hidden first step of another project. If that is your case, pull one permit for the panel and one for the new load, or ask whether your office lets the electrician combine them. Our guides to EV charger permits and heat pump permits and rebates cover the load side.

Before the meter is pulled

  1. Get the permit number from the electrician before the utility appointment.
  2. Confirm the inspection is booked for the same day as the disconnect, or ask how long the house may be without power.
  3. Ask whether the office enforces the 2020, 2023 or a later NEC, and whether your upgrade triggers the outdoor emergency disconnect.
  4. Keep the finaled permit; an insurer or a buyer’s inspector will ask how old the panel is and who installed it.

Method

Every quote and fee above comes from the office and utility documents listed with this guide, read on November 18, 2026 (the model code on ICC’s public code site, the January 2024 version of the 2024 IRC, early that day before the site began refusing automated readers); Boston’s and Portland’s totals are our arithmetic from their printed rates. The count of 106 is our dataset’s electrical rows whose verdict was read on an official source and whose rule mentions a panel, a service in any wording (new, changed, upgraded, relocated or repaired), a fuse box, a main breaker or a meter (solar panels excluded); none of those rules exempts a service change or upgrade, and the two partial exceptions are named above. Saint Paul’s 2026 NEC date is from its Electrical Permits and Inspections page, read the same day. Las Vegas, Greensboro, Clark County, Los Angeles County, San Diego County, Omaha, Lincoln, St. Louis and Des Moines are cited from their rules as verified in our dataset. Saint Paul’s handout is dated July 2023, so we did not use the fee it prints. We read three utilities’ pages; others may sequence the work differently.

Do You Need a Permit to Upgrade an Electrical Panel?: figures as of 28 Sep 2026, 137 jurisdictions. Now 178.

Sources

Get rule-change alerts

We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.

We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.