PermitNotebook / Guides

Guide

Heat Pump Permits and Rebates in 2026: What the Permit Costs and What Help Is Left

Replacing a central system with a heat pump is permitted as mechanical work: $50 to $429 in 20 offices we priced, median $127.31. The federal tax credit ended with 2025, and since federal guidance in May 2026 the electrification (HEAR) rebates in the states we read will not pay to replace a gas furnace. What three states' programs say today.

Yes, almost always. Of the 178 offices whose HVAC replacement rule we cover (November 18, 2026), 121 list a permit as required for a replacement and 56 make it depend on the work; none exempts it outright. (Virginia’s statewide code is the main exception inside the 121: it exempts swapping electric equipment like for like, such as one heat pump for another.) The permit is usually the mechanical (HVAC) one, sometimes with an electrical permit for a new circuit. In the 20 offices we priced, the permit for an ordinary changeout costs $50 to $429, with a median of $127.31. The money that used to soften the rest of the bill has mostly gone: the federal tax credit ended with 2025, and the state rebates funded by the federal Home Energy Rebates program now run in some states only. Their electrification (HEAR) rebates, in North Carolina since September 1, 2026 and in Minnesota’s planned rules, will not pay to replace a gas furnace.

Permit needed
Almost always121 of 178 offices as a rule; 56 depending on the work
Changeout permit, 20 offices
$50 to $429Median $127.31
Federal tax credit
Ended for improvements after 2025It was up to $2,000 a year for heat pumps
Federal-state rebates
Available in select statesUp to $8,000 for a heat pump for lower-income households, as in Minnesota's planned levels
Replacing a gas furnace
Not through HEAR in North Carolina since September 1, 2026Minnesota's planned rules keep the furnace in place

The next step: call your state energy office and ask one question before you get quotes: “Is the home electrification rebate open where I live, and does it cover my project if I heat with gas today?” Then ask each installer to quote the permit fee and to pull the permit.

Does a heat pump need a permit?

A heat pump is heating and cooling equipment, and the schedules we read put it under the mechanical (HVAC) permit. Swapping a furnace and air conditioner for a heat pump changes the type of equipment, so an exemption written for replacing like with like may not cover it; ask the office before assuming it does. Our guide to replacing an AC or furnace covers the triggers office by office, including mini-splits, the refrigerant rules for new systems, and what the inspector checks.

Two things push a heat pump job beyond the simplest permit:

  • A new circuit. A heat pump often needs a new breaker and wiring, which can mean an electrical permit, or a higher tier of the mechanical one. Pinellas County, Florida shows the steps: $140 for an equal air conditioning changeout, $240 with electric, and $340 with electric and ducts.
  • Ductwork. New or replaced ducts can move the job to a different line or add a charge, as in Pinellas’s top tier.

What the permit costs in 20 offices

We priced the simplest common case: replacing one existing ducted central system with a heat pump of about 3 tons, on the office’s changeout or residential mechanical line. Every fee comes from the office’s own schedule as quoted on our page for that office, re-read against its schedule on November 11, 16 or 17, 2026, before state surcharges and levies (Florida, for example, adds 2.5% of the permit fee, at least $4.00). Where your job adds a circuit or ducts, expect the higher line.

OfficeWhat the schedule chargesThis job, before state surcharges
Clay County, FLThree tons and under, changeouts on the same tonnage scale$50.00
Manatee County, FLAC Changeout Express, $62 ($48 with a virtual inspection)$62.00
Wake County, NCOne residential trade permit fee, whatever the number of trades$75.00
Polk County, FLResidential mechanical permit$85.00
Howard County, MDRequired when the replacement changes fuel or power source, as gas to heat pump does; an exact replacement of existing electric equipment needs none. $50 application plus $40 per heating or cooling zone (one zone); the schedule adds a 10% technology fee on all HVAC permits$94.00 ($99.00 if the technology fee also applies to the application fee)
Cobb County, GA$80 trade permit plus the $15 technology fee$95.00
Pima County, AZ$27 minor mechanical work (a residential air conditioner unit or equivalent), plus the $69 base fee for permits that need an inspection$96.00
Marion County, FLResidential mechanical scope$100.00
Clark County, WA$94 issuance plus $29 for a furnace or heat pump$123.00
Houston, TX$11.41 a ton plus $47 for a complete system, below the $91.06 minimum, plus the $33.56 administrative fee$124.62
Hillsborough County, FLHVAC equal change out, inspection only$130.00
Leon County, FLMechanical only permit$135.00
Pinellas County, FLEqual air conditioning changeout ($240 with electric, $340 with electric and ducts)$140.00
Town of Brookhaven, NYCAC/HVAC fee; the schedule does not say whether its $100 application fee is added$160.00
Indianapolis, INCombined heating and cooling system, 2,500 square feet or less$185.00
San Bernardino County, CAHVAC change out only, plus the $57 intake processing fee$213.00
Hernando County, FLA/C changeout only, plus the $93 technology fee and $15 unlicensed contractor surcharge the county applies to all building permits$248.00
Seminole County, FLMechanical/HVAC change-out, plus the $75 administrative fee$250.00
Riverside County, CAResidential mechanical, fixed fee$274.30
Orange County, CA (unincorporated)Mechanical flat fee, fiscal year 2026-27, including an HVAC or heating system replacement$429.00

Two offices are left out on purpose. In Virginia, the statewide code exempts “Replacement of mechanical appliances provided such equipment is not fueled by gas or oil” in one and two family homes, so whether a Virginia changeout needs a permit depends on what comes out; Stafford County, for one, charges $60 per trade per system when it does. And Gilbert, Arizona amends the model code’s small-refrigeration exemption to cover the “replacement” of such systems, which may reach a heat pump changeout; ask the town before you budget for its $150 mechanical permit.

Most of these are flat. A few price by size, so a bigger system costs more: Clay County by tons, Indianapolis by the floor area served, Houston by tons above its minimum. And many schedules price equipment item by item, so their total depends on exactly what goes in; those are on each office’s HVAC permit page rather than in this table.

The federal tax credit ended with 2025

The Energy Efficient Home Improvement Credit paid 30% of qualified costs, with up to “$2,000 per year for qualified heat pumps, water heaters, biomass stoves or biomass boilers.” The IRS says: “You can claim the credit for improvements made through December 31, 2025.” A heat pump installed in 2026 does not qualify. If a 2026 quote still subtracts a federal credit, ask the installer which one; this one is gone.

The federal-state rebates: where they run, and what changed

The Department of Energy’s Home Energy Rebates program funds two state-run rebates: HOMES, for whole-home upgrades, where “American households can save up to $8,000,” and the High-Efficiency Electric Home Rebate (HEEHR, which states often call HEAR), where “American households can save up to $14,000” on efficient electric upgrades including heat pumps. DOE’s page, last updated July 8, 2026, says the rebates “are now available in select states” and sends readers to their state or territory energy office. It names no states.

What we read on three state programs today:

StateStatusWhat it means for a heat pump
North CarolinaRunning, under new rules from September 1, 2026”Fuel Switching Projects are NOT allowed: Rebates will no longer be allowed for the replacement of gas or any other fossil fuel appliances through the HEAR rebates pathway.” Replacing old electric equipment with more efficient electric equipment is allowed, and insulation and air sealing “may be required” alongside a heat pump
MinnesotaNot launched: “There is no estimated program launch date” (update of October 12, 2026)Under the planned rules, heat pumps “are eligible in homes with existing fossil fuel heating systems when those systems remain in place.” Up to $8,000 for a cold-climate heat pump for households under 80% of area median income, $4,000 for 80% to 150%
ColoradoClosed for single-family homes”Rebates through the HEAR Program for single-family homes are no longer available.” Applications ran from November 13, 2025 to August 1, 2026

The change behind North Carolina’s rules came from Washington. North Carolina’s energy office says DOE issued updated guidance for both programs on May 29, 2026 (Program Notices 26-1 and 26-2) that states had to implement by September 1, 2026. The practical reading for a household that heats with gas: in North Carolina, a HEAR rebate will not pay to take the furnace out; in Minnesota, once the program opens, a heat pump can qualify if the furnace stays in place. Whether the whole-home (HOMES) rebates follow the same rule is a question for your state energy office. Other states may apply the guidance differently, which is why the question to your energy office matters more than any national summary.

HEAR rebates go to income-qualified households, and DOE says HEEHR rebates are offered “at point of sale either at retail outlets or through contractors.” Minnesota’s page warns that federal rules “do not allow retroactive rebates for items purchased before program launch.” Do not buy first and apply later.

Utility rebates are separate from all of this and vary by utility; ask yours. None of this is tax advice.

What a heat pump job costs

We did not find a current national price for a heat pump changeout from a public source that we could verify and cite for this guide, so we do not print one. Get at least two written quotes that each list the equipment, the permit fee, any electrical work, and the rebate, if any, with the program’s name.

If the heat pump needs a bigger electrical service, ask whether the service goes on its own electrical permit; our guide to panel upgrade permits covers that work.

Before you sign

  1. Ask your state energy office whether its home electrification rebate is open, whether you qualify by income, and whether your project (replacing gas, or adding a heat pump beside it) is eligible.
  2. Ask each installer which permits they will pull, mechanical and electrical, and what each costs.
  3. Check that the quote names a real program and does not count the federal credit that ended with 2025.
  4. Keep the permit and the passed final inspection: rebate programs, insurers and a future buyer can ask for proof the work was inspected.

Every jurisdiction we cover has an HVAC permit page with its rule, the fee as quoted, the office and the portal; start from the HVAC permit index.

Sources

Get rule-change alerts

We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.

We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.

Look up your locality