Guide
Do You Need a Permit for a Wood Stove, Pellet Stove or Fireplace Insert?
Yes, in every office we read that addresses them: a stove or insert is mechanical work, and the inspector checks floor protection, clearances and the chimney. A used stove is a second question, because federal sale rules and state laws in Washington and Oregon decide whether it may be installed at all.
Plan on a permit. Every office we read that mentions these appliances treats a wood stove, a pellet stove or an insert as permit work, and none of the verified rules in our dataset exempts an indoor stove or insert. Portland, Oregon, Boise and King County file it as a mechanical permit, and Henrico County, Virginia, lists “Gas or wood stoves or heaters” and “Prefabricated fireplaces” among new and replacement installations that need one. The inspection is the point of it: the inspector checks what sits under the stove, how far it is from the walls, and the chimney it vents into. If the stove is used, there is an earlier question. In Washington and Oregon a used stove that was never certified to federal or state emission standards may not be installed at all.
- Permit for a stove or insert
- Yes, in the offices we reada mechanical permit in Portland, Boise, King County
- Floor protection
- 16 in. in front, 8 in. at the sidesClark County, WA and Lincoln, NE
- Unlisted stove
- 36 in. from combustiblesLincoln; Clark County requires listing
- Chimney top
- 2 ft above anything within 10 ftClark County and Lincoln
- Used, uncertified stove
- May not be installedRCW 70A.15.3520; ORS 468A.495
- Fees read today
- $50.50 Cleveland, $160 Rochester, $187.04 Portland, OR
Write down the stove’s make and model, and whether it is new or used, then send your office: “I plan to install a [wood / pellet] stove [or a fireplace insert in my existing masonry fireplace] at [address]. Which permit do I need, do you want the manufacturer’s installation instructions with the application, and will the inspector want the chimney swept and inspected first?”
What the inspection looks at
Two offices we read publish their checklist in enough detail to plan from. They measure the same things, which is useful: these are the numbers to sketch on the floor before the stove arrives.
Under the stove. Lincoln, Nebraska, accepts a stove whose legs give “at least four inches of open space between the stove and the floor” where No. 24 gauge sheet metal or a noncombustible material at least 3/8 inch thick “entirely covers the floor under the stove and also extends out at least sixteen inches (16”) beyond the stove on the front or side where ashes are removed,” and “eight inches (8”) beyond the side and rear.” Clark County, Washington, asks for a hearth for an insert that extends “at least 16 inches from the front of the firebox opening and at least 8 inches beyond each side.”
Beside it. The stove’s listing label sets its clearances. Clark County says “The standard minimum clearance from the firebox to a combustible wall is 36 inches,” allows a noncombustible heat shield where the room is too small for that, and warns that “Sheetrock is not an approved material for wall protection.” Lincoln reads it differently: an air-ventilated shield of “five-eighths inch (5/8”) fire code sheet rock or 28 gauge sheet metal,” spaced an inch off the wall, allows “the minimum 36” clearance to be reduced to a 12” minimum clearance.” Follow your own office and the stove’s listing. Lincoln holds any unlisted appliance to “a minimum of thirty-six inches (36”) from combustible materials” and adds that “No homemade wood stoves shall be approved.”
The pipe. Both offices use 18 inches for single-wall stovepipe. Lincoln: it “must never pass through a wall, ceiling, or within 18” of a combustible material.” Clark County adds that the connector rises toward the chimney “at least one-quarter inch per foot.”
The top of the chimney. Clark County: “not less than two feet above any portion of a structure within a 10 foot radius of the chimney.” Lincoln states the same height. A chimney near a ridge or a taller wall may have to rise well above the roof where it exits, so measure that before you price the chimney kit.
A fireplace insert uses the chimney you already have
An insert is a stove that sits inside an existing fireplace, so the old chimney becomes part of the installation. Lincoln says inserts “are generally permitted only in masonry fireplaces, not in manufactured fireplaces,” and that an unused or existing chimney “must comply to current building codes and be thoroughly inspected before use,” naming a settled foundation, cracked mortar or liner, and blockage among the reasons one fails. Its practical advice is to have a chimney sweep who also repairs chimneys check for a proper liner, and it warns: “Never try to utilize a gas vent with a wood burning unit.” Clark County requires that “All fireplace inserts installed in Clark County must be listed.”
A gas fireplace or gas log set is a different job: it needs gas piping, and Boise lists “Install a wood stove, fireplace insert or gas fireplace” in one line of mechanical work. Our guide to gas line permits covers the piping.
Buying a used stove
In Washington and Oregon, a secondhand stove can pass every clearance rule and still be illegal to install. The federal rule governs what may be sold new: since May 15, 2020, a wood heater “manufactured or sold at retail for use in the United States” must meet a weighted average of 2.0 grams of particulate per hour (2.5 under the cord wood test option), under 40 CFR 60.532. Those limits are written for a stove when it is made and sold at retail; the two state laws below are the ones we found that decide whether a used stove may go into a house.
- Washington: “no used solid fuel burning device shall be installed in new or existing buildings unless such device is either Oregon department of environmental quality phase II or United States environmental protection agency certified or a pellet stove either certified or exempt from certification” (RCW 70A.15.3520). Clark County names one exception in its own guidance, “antique wood cook stoves and heaters manufactured prior to 1940.”
- Oregon: the state building code “shall prohibit installations of used solid fuel burning devices, except devices that were certified for sale as new” by the EPA or the state (ORS 468A.495), and ORS 468A.505 reaches the sale of a house: uncertified devices other than cookstoves, masonry heaters, masonry fireplaces and central wood-fired furnaces “must be removed and destroyed” when a home is sold. The seller does it before closing unless the buyer agrees in writing to do it within 30 days after.
Find the stove’s EPA certification label before you pay for it. Without one, there is no easy way to show an inspector in those states that the stove qualifies.
Mobile and manufactured homes
The permit may come from someone else. Clark County sends owners of a mobile or modular home to the Washington State Department of Labor and Industries “for a woodstove permit,” and Lincoln approves “only listed wood stoves and fireplaces for mobile homes.” Our guide to manufactured home permits explains who regulates work on those homes.
What the offices in our dataset name
We read the 163 confirmed heating and cooling rules in our dataset for any mention of these appliances. Eleven offices name a wood stove, pellet stove or other solid-fuel appliance as permit work: Boise, Cincinnati, Cleveland, Dallas (for solid-fuel furnaces), Eugene, Jefferson County, Colorado, King County, Washington, Meridian, Idaho, Portland, Maine, Portland, Oregon, and Rochester, New York. Nine more name fireplaces or inserts in their permit lines without naming the fuel, some of them gas (San Bernardino County’s row also notes an air district rule for new wood-burning devices, but its permit lines say only “Fireplace - New” and “Fireplace - Replacement”): Buffalo, Charleston, Cook County, Fort Wayne, Orange County, California, Sacramento County, San Bernardino County, Sioux Falls and Sterling Heights. The other rules do not mention these appliances by name, which is not the same as exempting them; their general mechanical permit language still applies. Portland, Maine, as verified in our dataset, puts a pellet or wood stove in a one or two family home on its Fast Track review.
Three fee lines we read today: Cleveland charges $50.00 for “Each solid fuel burning device; fireplace, insert, wood burning stove/oven” in a one, two or three family dwelling, plus the 1% State of Ohio surcharge, so $50.50; Rochester lists “Wood-burning stove or fireplace insert” at $160; and Portland, Oregon’s mechanical schedule effective July 10, 2026 prices a “Woodstove/Pellet stove” or an “Insert” at $94.00 against a $167.00 minimum fee for a one or two family dwelling, and the city adds “a 12% surcharge” for the State of Oregon to every mechanical permit, so a stove on its own permit costs $187.04 there.
After it is installed: when you may burn
The permit covers the installation, not every winter night. In Washington, a household with “an adequate source of heat without burning wood” may not burn in an uncertified device during a first-stage burn ban, or in any device during a second-stage ban, with an exception for power outages (RCW 70A.15.3580). The federal rule also binds the owner of a certified stove: it lists fuels “No person is permitted to burn,” including garbage, yard waste, plastics, treated wood, pallets and unseasoned wood, and it requires operation “in a manner consistent with the owner’s manual.” Pellet stove owners may burn only pellets “specified in the owner’s manual and graded under a licensing agreement” with an approved third party.
Method
Clark County’s woodstove page (revision dated 1.29.21), Lincoln’s wood stove pages (read in a browser, because the site refuses plain downloads), the federal rule on eCFR, the Washington and Oregon statutes, and the Portland pages and fee schedule, the King County, Boise, Henrico County, Rochester and Cleveland pages were read on November 18, 2026. The office counts come from the 163 HVAC rules in our dataset marked confirmed, read row by row; Portland, Maine’s Fast Track rule is cited from its verified row, and each office’s page here shows its read date. The clearance numbers are those two offices’ published rules; your stove’s listing and your office’s adopted code can set different ones. We have not surveyed burn ban or used-stove laws in states other than Washington and Oregon.
Do You Need a Permit for a Wood Stove, Pellet Stove or Fireplace Insert?: figures as of 28 Sep 2026, 137 jurisdictions. Now 178.
Sources
- Clark County, Washington, Woodstoves (rev. 1.29.21): permits for all solid fuel burning appliances, listing, used stoves, floor protection, hearth extensions, connector clearance, chimney height, and the Labor and Industries route for mobile and modular homes. (accessed )
- City of Lincoln, Nebraska, Building and Safety, Wood Stove Installation: chimneys, existing chimneys, fireplace inserts, unlisted stoves, mobile homes, hearth protection and stovepipe clearance (read in a browser render). (accessed )
- 40 CFR 60.530 and 60.532 (federal standards for new residential wood heaters): who is covered, the 2020 emission limits, pellet fuel grading, prohibited fuels and operation per the owner's manual. (accessed )
- Revised Code of Washington 70A.15.3520 (no used solid fuel burning device installed unless certified) and 70A.15.3580 (burn bans). (accessed )
- Oregon Revised Statutes 468A.495 (installation of used solid fuel burning devices) and 468A.505 (removal and destruction of uncertified devices when a home is sold). (accessed )
- City of Portland, Oregon, residential permits: installing a wood stove or fireplace insert listed as work that needs a mechanical permit. (accessed )
- City of Portland, Oregon, Mechanical Permit Fee Schedule effective July 10, 2026: woodstove or pellet stove $94, insert $94, one and two family minimum fee $167. (accessed )
- City of Portland, Oregon, current fee schedules page: the 12% State of Oregon surcharge on building, plumbing, electrical and mechanical permits. (accessed )
- King County, Washington, Do you need a permit: mechanical permit when equipment is installed, enlarged, moved or replaced, with a fireplace and a wood-burning stove as examples. (accessed )
- City of Boise, Idaho, Homeowner's Guide: installing a wood stove, fireplace insert or gas fireplace among mechanical permit work. (accessed )
- Henrico County, Virginia, When a Permit is Required: gas or wood stoves or heaters and prefabricated fireplaces among new and replacement installations. (accessed )
- City of Rochester, New York, building permit fees: wood-burning stove or fireplace insert, $160. (accessed )
- City of Cleveland, Ohio, Building and Housing permit fee schedule: each solid fuel burning device in a one, two or three family dwelling, $50.00, plus the 1% State of Ohio surcharge. (accessed )
Get rule-change alerts
We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.
We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.