North Carolina · North Carolina penalties for work without a permit

How to check a contractor's license in North Carolina

By Mario Bailey Last checked · 9 official sources

Quick answer

North Carolina licenses general contractors statewide through the North Carolina Licensing Board for General Contractors under G.S. chapter 87, article 1. A license is required when the cost of the undertaking is $40,000 or more (G.S. 87-1(a)); the board issues a residential contractor classification for builders who construct only residences under the North Carolina Residential Code (G.S. 87-10(b)(1a)). An owner who builds on their own land for their own occupancy is exempt, provided they comply with the permit affidavit rules in G.S. 87-14 (G.S. 87-1(b)(2)). Electrical contractors are licensed by the State Board of Examiners of Electrical Contractors with no dollar floor (G.S. 87-43), in limited, intermediate and unlimited classifications capped at $100,000, $200,000 and no limit per project (G.S. 87-43.3). Plumbing, heating and air conditioning, and fire sprinkler contractors are licensed by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors (G.S. 87-16, 87-21), which issues a Class I license for all structures and a Class II license for single-family detached residential dwellings.

Where to look up a North Carolina license

Which North Carolina trades need a state license

North Carolina trade Licensed by When no North Carolina license is needed
General contractor North Carolina Licensing Board for General Contractors (ncleg.gov) A license is needed where "the cost of the undertaking is forty thousand dollars ($40,000) or more" (G.S. 87-1(a)). Exempt: an owner who constructs or alters a building on their own land when "the building is intended solely for occupancy by that person and his family" and the owner complies with G.S. 87-14 (G.S. 87-1(b)(2)); the exemption is presumed not to apply if the owner does not occupy the building for at least 12 months after completion.
Residential contractor North Carolina Licensing Board for General Contractors (residential contractor classification of the general contractor license) (ncleg.gov) Same as general contractors: the license applies where the cost of the undertaking is $40,000 or more (G.S. 87-1(a)), with the same owner-occupant exemption (G.S. 87-1(b)(2)).
Electrical State Board of Examiners of Electrical Contractors (ncleg.gov) No dollar threshold. Exceptions in G.S. 87-43.1 include a person working "upon that person's own property and for that person's own benefit when such property is not intended at the time for rent, lease, or sale" (87-43.1(5a)), bona fide employees of a licensee (87-43.1(3)), and "the replacement of lamps and fuses" and servicing of cord-connected appliances (87-43.1(7)).
Plumbing State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors (ncleg.gov) No dollar threshold. The article "shall not apply to those who clean plumbing drains or those who make minor repairs or minor replacements to an already installed system of plumbing, heating or air conditioning" (G.S. 87-21(c)). Contracting is defined as work done "for a valuable consideration", but anyone installing a system on property intended for sale or rental is covered regardless of payment (G.S. 87-21(a)(5)).
Heating and air conditioning State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors (ncleg.gov) No dollar threshold. Minor repairs and minor replacements are exempt; they "shall include the replacement of parts in an installed system which do not require any change in energy source, fuel type, or routing or sizing of venting or piping" (G.S. 87-21(c)).

What North Carolina law says about unlicensed contracting

Contracting without the required license is a Class 2 misdemeanor in all three licensed fields: general contracting (G.S. 87-13), electrical contracting (G.S. 87-48(a)) and plumbing, heating, or fire sprinkler contracting (G.S. 87-25). The maximum fine for a Class 2 misdemeanor is $1,000 (G.S. 15A-1340.23). The electrical and plumbing boards may also seek a court injunction, and when they win, the court must award the board its reasonable attorney's fee of up to $5,000 plus costs (G.S. 87-48(c), 87-25.1(b)).

N.C. Gen. Stat. 87-13, 87-25, 87-25.1, 87-48, 15A-1340.23. Read the statute

Doing the work yourself in North Carolina

A North Carolina homeowner may pull the permit and do the work. G.S. 87-1(a) reaches general contracting only where the cost of the undertaking is $40,000 or more, and G.S. 87-1(b)(2) then exempts a person who constructs or alters a building on land that person owns, provided the building is intended solely for occupancy by that person and his family after completion and the person complies with G.S. 87-14. There is no outright ban on selling, but there is a look-back that works like one: if the building is not occupied solely by the person and his family for at least 12 months following completion, the statute presumes the person did not intend the building solely for that occupancy, which defeats the exemption. G.S. 87-14(a)(1) requires an owner claiming the exemption to execute a verified affidavit attesting that they own the property, that they will personally superintend and manage all aspects of the construction and will not delegate that duty to anyone unlicensed, and that they will be personally present for all inspections required by the State Building Code unless a licensed architect sealed the plans. The inspector transmits that affidavit to the Licensing Board, and if the Board determines the exemption was not available the building permit is revoked under G.S. 160D-1115. The exemption removes the general contractor license requirement only. It does not exempt the work from permits or inspections, and G.S. 160D-1113 provides that when a permit is held by an owner exempt under 87-1(b)(2), no inspection may be conducted without the owner present unless an architect sealed the plans.

N.C. Gen. Stat. 87-1(a), 87-1(b)(2), 87-14(a)(1), 160D-1113, 160D-1115. Read the statute

A license is not a permit: who issues North Carolina permits

A licensed contractor still needs a permit for work the local code covers, and the permit, not the license, is what gets the work inspected. We hold verified permit rules for these 6 North Carolina jurisdictions:

This page compiles what North Carolina's statutes and licensing agencies publish, checked on the date above. It is not legal advice. A license search shows status on the day you search, so check it again before you sign and ask the contractor for the license number the state issued.