PermitNotebook / Guides

Guide

Do You Need a Permit to Replace or Add an Exterior Door?

A same-size swap often needs none; a new or wider opening always does, because it cuts the wall's framing. Three doors carry rules a swap must still meet: the door from the garage into the house, the required exit door, and any door that opens onto a pool. Where offices permit every replacement, and how Florida's product approval law treats exterior doors.

If the new door fits the old opening and nothing in the wall around it changes, many offices need no permit, though some permit every exterior door. Cutting a new doorway, or widening one for a patio slider or French doors, is permitted work everywhere we read, because it removes studs and needs a header sized to carry the wall and roof above. And three doors are never just a swap, even same-size: the door from the garage into the house, the house’s required exit door, and a door that opens onto a pool.

Same size, same opening
Often exemptMontgomery County, MD; Wichita-Sedgwick County, KS
Every exterior door permitted
Franklin County, OHfrom our dataset
New or wider opening
Building permitit alters the framing
Garage-to-house door
Solid wood or steel 1 3/8 in., or 20-minute ratedR302.5.1 as Wichita prints it
Florida
Exterior doors need product approvalF.S. 553.842(5)

Measure the rough opening before you shop, then ask: “I am replacing the [front / back / garage-to-house / patio] door at [address] with a [type] door of the same size in the same opening. Does that need a permit? If I widen the opening to [width] inches, what do you need from me for the header?”

A swap versus a new opening

The clearest statement of the line we read is in the Wichita and Sedgwick County code. It exempts “Replacement of windows or doors or replacement of roof skylights or equipment with the same size or smaller unit(s) that does not involve the removal, cutting, alteration or replacement of any building structural member; including but not limited to studs, headers, girders, beams, joists, rafters, cripples, jacks or other supporting framing member(s).” Framing used to fill in an opening for a smaller door is exempt too. Montgomery County, Maryland, puts the same idea in fewer words, listing “Windows and doors without changing the opening size and without changing the net clear opening dimensions” among work that most likely needs no permit.

Portland, Oregon, draws the same line on its own permit page, listing “Replace doors or windows if the existing openings are not widened or reduced in size” as work that needs no permit and “Cut new window or door opening, widen or reduce the size of existing openings” as work that does.

Some offices skip the distinction. In our dataset’s verified rows, Franklin County, Ohio, lists doors on its permit list with no size condition, and Lexington, Kentucky, names adding a window or door among remodeling that needs a building permit. Florida splits by county under the state’s small-job exemption: Pinellas County lists “Doors” and “Overhead Garage Doors” among work under $7,500 that may qualify, while Pasco County treats “windows and doors” as structural work outside it and exempts only “Interior doors and trim (existing openings, no modifications to the wall)” and “Glass replacement of existing window and door (glass only no frame).” Our guide to the Florida $7,500 exemption covers that law.

A new or wider opening is a structural change in every rule above. Plan on a building permit, a header sized for the load (your office may want it on a drawing), and a framing inspection before the wall is closed.

The door from the garage into the house

This door is a fire separation, so a same-size swap still has to meet the code. The residential code as Wichita prints it says: “Openings from a private garage directly into a room used for sleeping purposes shall not be permitted. Other openings between the garage and residence shall be equipped with solid wood doors not less than 1 3/8 inches (35 mm) in thickness, solid or honeycomb-core steel doors not less than 1 3/8 inches (35 mm) thick, or 20-minute fire-rated doors.” The same code’s exemption adds that a replacement “shall not be of a lower fire rating than required by this Code for any rated wall or assembly.” A hollow interior door bought to match the hallway does not meet that line. Wichita’s amended text says nothing about closers or latches, and we could not read the model code itself today, so ask your office whether its edition also requires this door to be self-closing or self-latching.

The required exit door

The code requires an egress door, and Wichita’s exemption protects it: “Placement of smaller windows or doors shall not reduce the minimum size requirements of escape and rescue openings, or egress door(s).” So swapping the front door for a narrower decorative unit can turn an exempt job into a code problem. The landing outside that door has rules of its own, which our guide to building a porch explains.

A door that opens onto a pool

If a house wall forms part of a pool’s barrier, the doors in that wall are part of the pool safety system. In our dataset, the Town of Hempstead, New York, requires an audible alarm sounding for at least thirty seconds on any door into the pool area where a dwelling wall forms part of the enclosure, and Clay County, Florida’s pool rules list exit alarms on doors and self-closing, self-latching doors among the safety options a pool owner must choose from. A new patio door toward the pool can therefore bring in the pool barrier rules; our guide to why a pool permit is rarely one permit covers the barrier.

Florida: approved products

Florida’s product approval law names “exterior doors” among the categories that must go through the state’s approval system (“panel walls, exterior doors, roofing, skylights, windows, shutters, impact protective systems, and structural components”). Ask your Florida office whether it wants the door’s product approval number with the application, and get the number from the supplier before you order.

Our guide to replacing windows covers the state statutes in North Carolina, Virginia and Pennsylvania that exempt window and door replacement on the same terms.

Before you order the door

  1. Measure the rough opening and the existing door’s width and thickness.
  2. Decide whether the opening changes; if it does, plan on a permit and a header.
  3. For a garage-to-house door, buy one that meets the fire rule above.
  4. In Florida, get the product approval number with the quote.
  5. In a historic district, ask first: Pittsburgh, in our dataset, sends door work in a locally designated historic district to zoning review it otherwise skips.

Method

Quotes are from the Wichita-Sedgwick County code, the Montgomery County list, Portland’s permit page, Florida’s statute and the Pinellas County and Pasco County pages, all read on November 18, 2026. Franklin County, Lexington, Hempstead, Clay County and Pittsburgh are cited from their verified rows, with each row’s read date on that office’s page here. The Wichita code amends the model residential code, so its garage door text may differ from your office’s edition; we could not read the model code itself today.

Do You Need a Permit to Replace or Add an Exterior Door?: figures as of 28 Sep 2026, 137 jurisdictions. Now 178.

Sources

Get rule-change alerts

We catch permit rule and fee changes in our verification passes and post them to the rule tracker. Get them by email instead.

We may send occasional verified rule-change notes for your area; unsubscribe anytime. See our privacy policy.