EV Charger Permit in Meridian, Idaho
Permit required
Yes, a permit is required
Before installing a home EV charging station or the circuit that feeds it.
Issued byCity of Meridian Community Development Department, Building Services (Development Services Division)
By Mario Bailey, verified against official sources
Quick answer
Meridian requires a City electrical permit to install any wiring or apparatus, and it has a dedicated Residential Electric Vehicle Charging Station permit (R-EVCS) for home chargers. The submittal calls for a site plan, a single-line electrical diagram, load calculations and the manufacturer's installation instructions, plus panel-upgrade details if needed. A separate mechanical permit is needed if ventilation is required.
Who is pulling this permit?
Apply yourself
Hire it out
Sponsored
A licensed electrician typically pulls the electrical permit as part of the install. If you have not picked one yet, compare a few quotes first.
Compare electrician quotes on Angi
Sponsored link. PermitNotebook may earn a fee if you request quotes through it. Partners never influence our permit data.
When a permit is usually needed
Before installing a home EV charging station or the circuit that feeds it.
What an EV charger permit costs in Meridian
How to apply in Meridian
In Meridian, in most of the US, installing a Level 2 (240 volt) home EV charger is handled as an electrical permit built around a load calculation and a single line diagram showing the new dedicated circuit. A Level 1 charger that simply plugs into an existing 120 volt outlet typically needs no permit unless new wiring is added.
What most EV charger permit applications include:
- For Meridian, a Level 2 charger needs its own dedicated 240 volt circuit and requires an electrical permit with inspection, since each outlet installed for EV charging must be fed by an individual branch circuit with no other outlets on it (NEC 625.40).
- For Meridian, the application includes an electrical load calculation showing the existing service panel has enough spare capacity for the added EVSE demand, worked out using the standard dwelling load calculation method (NEC 220.83).
- For Meridian, the breaker or other overcurrent device feeding the charger must be sized for continuous duty, rated at not less than 125 percent of the equipment's maximum load (NEC 625.41).
- Plan submittal typically includes a single line diagram showing conductor size, breaker size, conduit, and panel rating, plus the charger's manufacturer specifications, since the EVSE itself must be a listed product (NEC 625.5).
- For charging equipment rated over 60 amps or over 150 volts to ground, the application has to show a disconnecting means installed in a readily accessible location and capable of being locked open (NEC 625.43).
- For Meridian, the charger must be shown connected and fastened in place according to the manufacturer's installation instructions, whether it is hardwired or a plug in unit on a dedicated receptacle (NEC 625.44).
General submittal guidance from National Electrical Code (NFPA 70), Article 625 Electric Vehicle Charging System and Article 220 Load Calculations, 2017 to 2023 editions. Source. City of Meridian Community Development Department, Building Services (Development Services Division) sets the exact checklist for Meridian.
Where to apply in Meridian:
City of Meridian Community Development Department, Building Services (Development Services Division)
- 33 E. Broadway Ave., Suite 102, Meridian, ID 83642
- Phone: 208-887-2211
- Email: buildingservices@meridiancity.org
EV Charger Permit in Meridian compared with nearby Idaho localities
| Locality | Permit needed? | Threshold | What each Idaho schedule says | Verified |
|---|---|---|---|---|
| Meridian | Permit required | Any size | The "Existing Residential" electrical line is $40 permit fee plus $10 for each branch... | |
| Boise | Permit required | Any size | ...but not limited to, wall heaters, residential electric car outlets" $57.00 (Table... |
Inspections and closing out your permit
In Meridian, a Level 2 EV charger installation gets a rough wiring inspection if any new conductors will be hidden inside walls, ceilings, or run underground, then a final inspection that checks the dedicated circuit, breaker sizing, any required GFCI protection, the disconnect, and the charger's listing before the permit closes.
- In Meridian: if new EVSE conductors will be concealed in a wall or ceiling, or run underground, they must pass a rough wiring inspection before being covered, since that inspection confirms the dedicated branch circuit required for the charger (NEC 625.40).
- In Meridian: at final inspection, the breaker or other overcurrent device serving the charger is checked to confirm it is properly rated for the continuous EV charging load (NEC 625.41).
- In Meridian: any receptacle installed for EV charging, as opposed to a hardwired connection, has to be checked for ground fault circuit interrupter protection (NEC 625.54).
- In Meridian: where the EVSE is rated over 60 amps or 150 volts to ground, the inspector confirms a lockable, readily accessible disconnecting means was installed (NEC 625.43).
- In Meridian: the inspector verifies the charger, along with its fittings and associated equipment, carries a nationally recognized testing laboratory listing (NEC 625.5).
- In Meridian: mounting height is checked against the manufacturer's instructions, with the coupling means generally required to sit at least 18 inches above an indoor floor or 24 inches above outdoor grade unless the equipment is listed otherwise (NEC 625.50).
Schedule each inspection in advance and pass the final before you use the work or close the permit. Request inspections through the Meridian permit portal or by phone at 208-887-2211.
Inspection sequence from National Electrical Code (NFPA 70), Article 625 Electric Vehicle Charging System, 2017 to 2023 editions. Source. An open permit left un-inspected can surface later in a title search or home sale.
Your EV Charger Permit checklist for Meridian
- Confirm the requirement. Yes, a permit is required. Usually needed: Before installing a home EV charging station or the circuit that feeds it.
- Budget the fee. The fee schedule has no EV-specific line. The "Existing Residential" electrical line is $40 permit fee plus $10 for each branch circuit. Fee schedule: https://apps.meridiancity.org/CITYFEEWEB/ (Building section, Resolution 18-2110 unless noted). Official fee schedule.
- Apply. In Meridian, in most of the US, installing a Level 2 (240 volt) home EV charger is handled as an electrical permit built around a load calculation and a single line diagram showing the new dedicated circuit. A Level 1 charger that simply plugs into an existing 120 volt outlet typically needs no permit unless new wiring is added. Start at the Meridian permit portal.
- Keep the office details handy. City of Meridian Community Development Department, Building Services (Development Services Division). Phone: 208-887-2211. Address: 33 E. Broadway Ave., Suite 102, Meridian, ID 83642.
- Plan for inspections. In Meridian, a Level 2 EV charger installation gets a rough wiring inspection if any new conductors will be hidden inside walls, ceilings, or run underground, then a final inspection that checks the dedicated circuit, breaker sizing, any required GFCI protection, the disconnect, and the charger's listing before the permit closes.
Compiled from the official sources on this page. Last checked .
Permitting activity in Meridian
In 2025, Meridian authorized permits for 1,364 new residential housing units (1,164 single-family, 200 in multi-family buildings), valued at $297M, down from 1,551 the year before. That works out to about 11.3 permits per 1,000 residents.
Source: U.S. Census Bureau, Building Permits Survey, 2025 annual data · population 121,182.
Frequently asked questions
- Do you need an EV charger permit in Meridian?
- Meridian requires a City electrical permit to install any wiring or apparatus, and it has a dedicated Residential Electric Vehicle Charging Station permit (R-EVCS) for home chargers. The submittal calls for a site plan, a single-line electrical diagram, load calculations and the manufacturer's installation instructions, plus panel-upgrade details if needed. A separate mechanical permit is needed if ventilation is required. Always confirm with the City of Meridian Community Development Department, Building Services (Development Services Division) before starting.
- How much does an EV charger permit cost in Meridian?
- The fee schedule has no EV-specific line. The "Existing Residential" electrical line is $40 permit fee plus $10 for each branch circuit. Fee schedule: https://apps.meridiancity.org/CITYFEEWEB/ (Building section, Resolution 18-2110 unless noted). See the official fee schedule for current amounts.
- Where do you apply for an EV charger permit in Meridian?
- You can apply through the Meridian permit portal or contact the City of Meridian Community Development Department, Building Services (Development Services Division) directly. The links are listed on this page.
- Can a homeowner pull an EV charger permit themselves in Meridian?
- Under Idaho law (Idaho Code 54-5205(2)(l); 54-5209; 54-1016(2)(a); 54-2602(1)(a); 54-5002(1)(a)): Idaho homeowners may do their own work. The Idaho Contractor Registration Act exempts an owner building on their own residential property, whether or not they live there. That exemption does not cover an owner who builds in order to promptly sell, unless they have lived in the home as their primary residence for at least 12 months before the sale. The trade laws carry their own owner exemptions: a property owner may do noncommercial electrical work in their own primary or secondary residence (54-1016(2)(a)), and an owner or contract purchaser may do their own plumbing (54-2602(1)(a)) and HVAC work (54-5002(1)(a)) in a single-family home or duplex, but must still meet the code and get the permit. A permit issued to an exempt owner is marked "no contractor registration provided" (54-5209). Confirm how Meridian applies this before you apply.
From the Library
What else needs a permit in Meridian
Every other permit type we have verified for this jurisdiction, with the rule that applies here.
| Project | Permit needed? | Threshold | Typical fee |
|---|---|---|---|
| Bathroom Remodel Permit | It depends | finish-only work versus moving or adding plumbing, wiring or walls | Plumbing (R-PLMEX) per the plumbing lines: $30 permit fee plus $8 per fixture |
| Deck Permit | It depends | deck height above grade at any point; also must be 200 sq ft or less, detached from the dwelling and not serving the required exit door | ...type R-MISC) use the "Residential/Commercial Permit Fee Calculation Formula": $50... |
| Electrical Permit | Permit required | Any size | Building Electrical Fees: "Existing Residential": $40 permit fee plus $10 for each... |
| Fence Permit | Permit required | Any size | Planning Fees line "Fence Permit": $10 (Resolution 25-2546) |
| HVAC Permit | It depends | new installation or replacement versus repair or maintenance of an existing system | Building Mechanical Fees: "Base Fee - Applied to all permits": $50 |
| Patio Permit | It depends | floor area of a detached patio cover or shade structure; attached covers always need a permit | "Covered patios / Storage Sheds - Valuation": $50.00 base fee plus $5.50 add'l for each... |
| Plumbing Permit | It depends | clearing stoppages or repairing leaks without rearranging pipes, valves or fixtures versus all other plumbing work | Building Plumbing Fees, "Permit fee (each living unit)": each single family dwelling $30 |
| Pool Permit | It depends | water depth, prefabricated pools; other pools need a permit at any depth | ...permit by the "Residential/Commercial Permit Fee Calculation Formula": $50 base fee... |
| Roof Replacement Permit | Permit required | Any size | ...permits use the "Residential/Commercial Permit Fee Calculation Formula": $50 base... |
| Shed Permit | It depends | floor area of a one-story detached shed or accessory structure | "Covered patios / Storage Sheds - Valuation": $50.00 base fee plus $5.50 add'l for each... |
| Solar Permit | Permit required | Any size | $0.00 to $2,000: $40.00 base fee + 2.5% of value |
| Water Heater Permit | Permit required | Any size | The plumbing lines that fit are "Fixture replacement permit fee" $30 and "Replacement... |
EV Charger Permit in other Idaho localities
Everything above, sourced
Code references
National and state model-code sections the general guidance on this page is drawn from. They are not Meridian documents; the office above sets the local rules.
How this EV charger permit page for Meridian was verified. 2 official sources: meridiancity.org, library.municode.com; fee schedule: official document. Last checked by Mario Bailey, not confirmed with City of Meridian Community Development Department, Building Services (Development Services Division). Rules change; confirm before you build. How we verify.
Last checked: Report an error on this page
Compare EV Charger Permit requirements across Idaho localities