Massachusetts · Massachusetts penalties for work without a permit

How to check a contractor's license in Massachusetts

By Mario Bailey Last checked · 12 official sources

Quick answer

Massachusetts splits contractor oversight between a building-code license and a consumer registration. Anyone supervising construction, alteration, repair or demolition regulated by the state building code (780 CMR) must hold a Construction Supervisor License (CSL) from the Board of Building Regulations and Standards, which the Division of Occupational Licensure's Office of Public Safety and Inspections administers; a homeowner doing permitted work on his or her own one- or two-family home is exempt. A contractor working on an existing owner-occupied home of one to four units must also register as a Home Improvement Contractor with the Office of Consumer Affairs and Business Regulation under M.G.L. c. 142A; this is a registration, not a license. Electricians, plumbers and gas fitters, and sheet metal workers hold separate state licenses from their own boards within the Division of Occupational Licensure. Massachusetts does not recognize out-of-state contractor licenses.

Where to look up a Massachusetts license

Which Massachusetts trades need a state license

Massachusetts trade Licensed by When no Massachusetts license is needed
Residential contractor Board of Building Regulations and Standards, administered by the Office of Public Safety and Inspections, Division of Occupational Licensure (Construction Supervisor License) (web.archive.org) No dollar threshold. A homeowner performing work for which a building permit is required on his or her own one- or two-family home is exempt, but must act as supervisor of anyone hired; a person who builds more than one home in a two-year period is not a homeowner. Work within the scope of another state trade license (wiring, plumbing, gas fitting, HVAC and similar) does not need a CSL. Buildings of more than 35,000 cubic feet are overseen by a registered design professional instead.
Roofing Board of Building Regulations and Standards, administered by the Office of Public Safety and Inspections, Division of Occupational Licensure (Specialty Construction Supervisor License, roof covering) (mass.gov) No dollar threshold. The roof covering specialty license covers roof covering work including replacement of 25% of sheathing and 25% sistering of roof rafters. The CSL homeowner exemption applies.
Home improvement contractor Office of Consumer Affairs and Business Regulation, Home Improvement Contractor Program (registration, not a license) (malegislature.gov) Applies to residential contracting on a pre-existing owner-occupied building of one to four dwelling units, not to new homes. Not required for a project whose aggregate contract price is less than $500, for a part-time contractor who earned less than $5,000 in gross revenues in the previous 12 months, for people building their own home or personally doing the renovations, for licensed trades acting within their license (construction supervisors excepted), or for contractors working exclusively in areas such as landscaping, interior painting, floor covering, fencing, above-ground pools, ground level patios or driveways.
Electrical Board of State Examiners of Electricians, Division of Occupational Licensure (master electrician and journeyman electrician licenses) (malegislature.gov) No dollar threshold and no homeowner exemption in the statute. The chapter does not apply to a person not in the electrical business who hires a licensed electrician, or to an apprentice employed by a licensee.
Plumbing Board of State Examiners of Plumbers and Gas Fitters, Division of Occupational Licensure (master and journeyman plumber and gas fitter licenses) (malegislature.gov) No dollar threshold and no homeowner exemption in the statute. A licensed master or journeyman plumber may also do gas fitting.
Heating and air conditioning Board of Examiners of Sheet Metal Workers, Division of Occupational Licensure (master and journeyperson sheet metal worker licenses, for ductwork and air exhaust systems) (malegislature.gov) No dollar threshold. The statute defines sheet metal work as duct and air exhaust system work, except for refrigeration and combustion units, and excludes work done by licensed pipe fitters, oil burning technicians, refrigeration technicians, plumbers or gasfitters. The board says only a licensed master or journeyperson sheet metal worker can perform sheet metal work at your home or business; restricted licensees are limited to residential dwellings of not more than 3 stories and small non-residential projects.

What Massachusetts law says about unlicensed contracting

A contractor who knowingly, willfully or negligently works without a required Home Improvement Contractor registration, or keeps working after it is revoked, suspended or not renewed, faces a fine of up to $5,000, up to two years in prison, or both, on top of any administrative penalty; the director may also assess an administrative penalty of up to $2,000 per violation, and any violation of the chapter is an unfair or deceptive act under M.G.L. c. 93A. Doing electrical work without the required license carries a fine of $1,000 to $1,500 for a first offense, rising to $2,000 to $2,500 or six months in the house of correction for later offenses. Working as a plumber or gas fitter without a license is punishable by a fine of up to $100, and practicing sheet metal work unlicensed by a fine of $100 to $1,000. Violating the state building code, which includes the construction supervisor licensing rules, carries a fine of up to $1,000, up to one year in prison, or both, for each violation, and each day is a separate offense.

M.G.L. c. 142A, ss. 17, 18 and 19; c. 141, s. 5; c. 142, s. 16; c. 112, s. 246; c. 143, s. 94(a). Read the statute

Doing the work yourself in Massachusetts

Yes for the building permit itself: 780 CMR R105.3 says 'the owner or authorized agent shall file a permit application.' The construction supervisor license (CSL) rules contain an explicit homeowner exemption at 780 CMR 110.R5.1.3.1: 'Any homeowner performing work for which a building permit is required shall be exempt from the licensing provisions of 780 CMR 110.R5, provided that if a homeowner engages a person(s) for hire to do such work, then such homeowner shall act as supervisor.' 'Homeowner' is defined as a person who owns a parcel on which he or she resides or intends to reside with a one- or two-family dwelling; a person who constructs more than one home in a two-year period does not qualify. The exemption does not extend to the trades: plumbing and gas work requires licensure under M.G.L. c. 142, s. 3, which contains no homeowner exemption, and the electrician licensing exemptions in M.G.L. c. 141, s. 1A likewise do not include homeowners.

780 CMR R105.3; 780 CMR 110.R5.1.3.1 (10th ed.); M.G.L. c. 142, s. 3; M.G.L. c. 141, s. 1A. Read the statute

A license is not a permit: who issues Massachusetts permits

A licensed contractor still needs a permit for work the local code covers, and the permit, not the license, is what gets the work inspected. We hold verified permit rules for these 2 Massachusetts jurisdictions:

This page compiles what Massachusetts's statutes and licensing agencies publish, checked on the date above. It is not legal advice. A license search shows status on the day you search, so check it again before you sign and ask the contractor for the license number the state issued.